TS
okey...
I used this jack to repair my earbuds.
I soldered the jack to my earbuds only i forgot to put the jack end on the cable before hand. So I had to desolder it the problem with that was that the plastic started to melt and 2 solder joints connected because of that.
Pro's
It's what it says it is
con's
weak design
Very large
1 chance to get it right
expensive
I soldered the jack to my earbuds only i forgot to put the jack end on the cable before hand. So I had to desolder it the problem with that was that the plastic started to melt and 2 solder joints connected because of that.
Pro's
It's what it says it is
con's
weak design
Very large
1 chance to get it right
expensive
0
0
Report