Hosco

Hosco TL-NF3B Nut Files Bass Guitar

For bass guitar
3 pieces
Thicknesses: .045"/.085" - .065"/.105" - .075"/.130"

Hosco H-FPR-Set Polishing Rubbers

For guitar frets
4 polishing rubbers in grit sizes 150, 180, 400 and 1000
Simple and fast fret polishing tool

Hosco H-SB-1 Sanding Block

Curved - for shaping fretboards and levelling frets
Matching self-adhesive Kovax sandpaper in different grits available in the shop (not included in the delivery)
Radius: 184 mm (7.25") and 241 mm (9.5")

Hosco H-SB-2 Sanding Block

Hosco H-SB-2 Sanding Block; curved sanding block for shaping fingerboards, radius 10" /254 mm und 12" / 305 mm; dimensions of the block 80 mm x 150 mm...

Hosco TL-NF3A Nut Files A-Guitar

For acoustic guitar
3 pieces
Thicknesses: .016"/.042" - .026"/.050" - .036"/.055"

Hosco H-GB4 Groobar Set

4 non-hardened steel gauges in different thicknesses
Protection against too deep cutting of the string notches in the saddle
Blade thickness L: 1.07 mm / 0.042"

Hosco H-FL160S Fret Dressing File

Single-cut file with 20 teeth/inch
For dressing the bevel of the frets at the edge of the fingerboard
Can also be used as a coarse single-cut file for dressing worn frets

Hosco H-FS10 Fret Setter

For resetting frets in the fingerboard without loosening the strings
Fits over the crown of the fret and is suitable for small, medium and wide frets
Material: Brass

Hosco H-SCR-5 Scraper Set

Consisting of 5 blades with different contours
Blade thicknesses: 0.2 mm and 0.4 mm

Hosco H-NF-UK Nut File Ukulele

4 Files: .024", .028", .032", .036"
Aluminium handle with 3 magnets
Holds the file ergonomically and securely in the hand

Hosco H-IDP-156 Diamond Grinding

Grit: 150 (top side) and 600 (bottom side)
Ideal for honing sharp fret ends or sharpening knives

Hosco H-NF-CG Nut File ClassicGuitar

6 Files: .028", .032", .036", .040", .042", .046"
Aluminium handle with 3 magnets
Holds the file ergonomically and securely in the hand

Hosco H-RG2 Universal FretboardGauge

For fretboard radius, string position and fret height
Suitable for the 6 most common radii: 7.25", 9.5", 10", 12", 14", 16"
String height scale: 0.2 - 3.0 mm

Hosco H-NF-EB Nut File 5-St.Bass

5 Files: .046", .065", .085", .105", .130"
Aluminium handle with 3 magnets
Holds the file ergonomically and securely in the hand

In stock within 4–5 weeks

Hosco H-NF-EG009 Nut File E-Guitar

6 Files: .009", .012", .016", .024", .032", .042"
Aluminium handle with 3 magnets
Holds the file ergonomically and securely in the hand

In stock within 6–8 weeks

Hosco H-NF-AG Nut File AcousticSteel

6 Files: 012", 016", 024", 032", 042", 054"
Aluminium handle with 3 magnets
Holds the file ergonomically and securely in the hand

In stock within 3–4 weeks

Hosco H-NF-EG010 Nut File E-Guitar

6 files: 010", 013", 016", 028", 036", 046"
Aluminium handle with 3 magnets
Holds the file ergonomically and securely in the hand

In stock within 4–5 weeks

Hosco H-IDP-410 Diamond Sand. Plate

Hosco H-IDP-410 diamond sanding plate; 2 in 1 diamond sanding plate; 400 & 1000 grit; for honing sharp fret ends/sharp frets or sharpening knives and ...

Hosco H-IDP-156 Diamond Sand. Plate

150 & 600 Grit
For honing sharp fret ends/sharp frets or sharpening knives and tools
The diamond surface provides a clean, precise and fast fret finish

Hosco TL-NF3C Nut Files ClassicGuit.

For classical guitar
3 pieces
Thicknesses: .030"/.038" - .032"/.042" - .035"/.046"

The shipping costs are calculated on the checkout page.
The prices shown exclude VAT