A
Solid bar, good value, flexible spacing.
Well this is more than just a stereo bar!
You can connect 6 devices with the 6 screws if you like.
I have the bar mounted on my sound cart using a Manfrotto clamp and the top of a mic stand which is quick to raise and lower for moving through doorways. The mic stand screws into the mid point of the bar using a standard 3/8 thread.
I use the bar to hold 2 radio mic antenna but I could also use it to hold 2 omni atoms mics.
The length of the bar means its handy if you want to space the mics or antenna further apart.
The one problem I found were the length of the screws, they were too long so that even when a device was screwed on all the way it was still loose on the bar so I had to add string or rubber washers to fill the gap and stabilise the device to the bar. Also the rubber washers could keep the screws in place on the bar when nothing is screwed into them.
I am happy with the purchase but don't know why K&M made the screws so long! Its a good strong bar!!
You can connect 6 devices with the 6 screws if you like.
I have the bar mounted on my sound cart using a Manfrotto clamp and the top of a mic stand which is quick to raise and lower for moving through doorways. The mic stand screws into the mid point of the bar using a standard 3/8 thread.
I use the bar to hold 2 radio mic antenna but I could also use it to hold 2 omni atoms mics.
The length of the bar means its handy if you want to space the mics or antenna further apart.
The one problem I found were the length of the screws, they were too long so that even when a device was screwed on all the way it was still loose on the bar so I had to add string or rubber washers to fill the gap and stabilise the device to the bar. Also the rubber washers could keep the screws in place on the bar when nothing is screwed into them.
I am happy with the purchase but don't know why K&M made the screws so long! Its a good strong bar!!
4
0
Report
