P
Millenium multi-clamp
Fantastic product has worked reliably, it is stable, solid and high quality- works great on my TD30-module and rack, you can easily use on a stand too. Well worth it and cheaper than other inferior models available online. it provides a good deal of variables/angles for modules allowing sloping or straightening(levelling or slanting) of either audio interfaces, modules and even some sampling pads, or Roland Octapads. It is a good all round clamp with a very handy base plate and a geared grip joint that won't fail or slip with heavy duty weight on it-I've tested it many times and used it daily on tour without issue.
2
0
Report
A
Sturdy and Strong
I initially purchased this clamp along with a Millenium cymbal stand in a bundled deal to use as an on stage stand for my Korg PadKontrol. After taking a look around and realising that brand name alternatives are rather expensive (the Roland equivalent was around £80) I decided to take my chances and go with this.
I must admit, from the outset, I have been very pleasantly surprised. The clamping mechanism on this item is very secure and robust and can be quickly adjusted if required. When in place the clamp doesn't move but there is also no stiffness when trying to adjust any of the fittings. The teeth hold together well and it looks like this will hold out for a fair number of years yet.
I must admit, from the outset, I have been very pleasantly surprised. The clamping mechanism on this item is very secure and robust and can be quickly adjusted if required. When in place the clamp doesn't move but there is also no stiffness when trying to adjust any of the fittings. The teeth hold together well and it looks like this will hold out for a fair number of years yet.
0
0
Report
L
Great for sound module.
I use this to mount my Roland Spd-SX on my set, and it works well for that purpose, if you have an existing stand available to hook it up to.
Multi-angle clamp makes it possible to clamp it onto just about every size and angle you want.
Multi-angle clamp makes it possible to clamp it onto just about every size and angle you want.
1
0
Report
D
Perfect product!
Does what it says. Quality build!
1
0
Report
J
Good clamp
Used to set up Alesis Sampler pad on stand. EasyPeasy , all works and is sturdy. Recommended
0
0
Report
MT
It clamps things to your kit.
We are using these clamps to attach a variety of drum modules to racks including an Alesis Trigger io, 2 Alesis Sample Pads, Roland SPDSX pads and the new NFUZD module.
The holes in the top are spaced perfectly for these units though as usual it does not come with mounting screws (they should come with the unit you are attaching). Overall the clamp is solidly built and very flexible, though the finish is not quite as pretty as on the bigger (and more expensive brands). The dull finish is the only thing I can find to complain about, overall this is a good piece of hardware.
The holes in the top are spaced perfectly for these units though as usual it does not come with mounting screws (they should come with the unit you are attaching). Overall the clamp is solidly built and very flexible, though the finish is not quite as pretty as on the bigger (and more expensive brands). The dull finish is the only thing I can find to complain about, overall this is a good piece of hardware.
0
0
Report
s
Clamps are well done!
1
0
Report
r
Solid Utility
A super and versatile addition to any set needing a flat surface support
0
0
Report
A
Perfect substitute for the Roland equivelant
I used to own a Roland PDS-10, but stupidly sold it and couldn't afford a new one when I came to realise I needed another one! This is a perfect fit for my Alesis ContolPad.
Mounted on the Millenium stand I got with it, it's very stable - even when my students come in a start pounding away randomly on the pads! It seems very sturdy - I don't have any concerns that it'll break at any point.
I'm planning on taking my ControlPad out to gigs with me, and I'm confident it'll be safe mounted using this. It's also very flexible, so I'll be able to re-configure the angle/height to suit the venues I'm in.
Very please all-round!
Mounted on the Millenium stand I got with it, it's very stable - even when my students come in a start pounding away randomly on the pads! It seems very sturdy - I don't have any concerns that it'll break at any point.
I'm planning on taking my ControlPad out to gigs with me, and I'm confident it'll be safe mounted using this. It's also very flexible, so I'll be able to re-configure the angle/height to suit the venues I'm in.
Very please all-round!
0
0
Report
J
Very Good Product
I use this to hold my Roland SPDSX onto a stand. I bought it because I didn't want to buy a Roland stand as they are very expensive, and as this is allot cheaper I thought I'd take a chance on it. Overall its very good. Even though initially its a struggle to get it attached I have been using it for nearly a year and doesn't show any signs of braking or wear. It Holds the SPDSX well and is always stable.
0
0
Report