AM
Buy this if You need angle connector 6.3mm
Buy this if You need angle connector 6.3mm.
I used such designed angled connector named with different brands.
It was always good, never broken. It looks not beautiful, but it is more sturdy than every another design connector in compare. Just does it job well and fits from thin to thick cables. I always use many circles of duct tape above cable attachment point using thin cables, after it is impossible to break the junction.
I used such designed angled connector named with different brands.
It was always good, never broken. It looks not beautiful, but it is more sturdy than every another design connector in compare. Just does it job well and fits from thin to thick cables. I always use many circles of duct tape above cable attachment point using thin cables, after it is impossible to break the junction.
0
0
Report
A
Neutrik Quality made in China
I have used these plugs for several years now, soldering my own cables for my effects board and making instrument cables. The quality of these plugs is absolutely outstanding for this cheap price. I can hear or see no difference between these plugs and more expensive ones.
The only tricky part is soldering the mass contact to the plug, but with a little bit of excercise (probably after two or three cables), you will do just fine and have good, long lasting plugs for your instruments and effects for barely one euro.
You have to be careful though when using these plugs directly into your amplifier, because of the angled jack it sometims blocks other inputs (for example on my Laney IRT Studio)
The only tricky part is soldering the mass contact to the plug, but with a little bit of excercise (probably after two or three cables), you will do just fine and have good, long lasting plugs for your instruments and effects for barely one euro.
You have to be careful though when using these plugs directly into your amplifier, because of the angled jack it sometims blocks other inputs (for example on my Laney IRT Studio)
0
0
Report
A
Very high quality for a cheap plug. Also very easy to solder, does not need a large amount of heat. The plastic looks weak, but it actualy is not. I have soldered on hundreds of them already onto the cables I make with no complaints. They easily over-last the cables they are soldered on. Highly recommended!!!
0
0
Report
f
Very reliable
If you need angled jack connector, this one is absolutely acceptable. Easy to solder, easy to assemble. So far very reliable.
0
0
Report
J
My favorite jack
Had one on my main playing guitar lead for years. Bought this one to add on another cable. Super good quality, price and design.
0
0
Report
A
It's Neutrik - it's going to be good.
Excellent jack that has been designed and manufactured with the care and precision you would expect from Neutrik.
Good cable clamping too. Ideal for use in situations where you don't want cable and jack sticking out. I use mine on my multi-effects unit as a clumsy foot could otherwise cause serious internal damage to the PCB if a regular straight jack was used.
Good cable clamping too. Ideal for use in situations where you don't want cable and jack sticking out. I use mine on my multi-effects unit as a clumsy foot could otherwise cause serious internal damage to the PCB if a regular straight jack was used.
0
0
Report
M
Jack 6.3mm
Vielen Dank für die schnelle Lieferung. Gute Verbindung, einfach zu löten, es ist auch möglich, ein dickes Kabel mit einem längeren 10m-Kabel an die Yamaha Stagepas 400-Anlage anzuschließen. An diesen Stecker können Sie problemlos 1,5-mm-Drähte mit einem Durchmesser von 8 mm anlöten
0
0
Report
A
Perfect product!
I love Neutrik Rean!
They are perfect if you search professional items! :)
They are perfect if you search professional items! :)
0
0
Report
A
Angled Jack Plug
A great product for the price. Well built and easy to de / re-solder. Nothing bad to say. I've never had problems with any of the REAN range and expect these to last a long time.
0
0
Report
a
Neutrik -what else
I had to buy a 6,3mm plug for my Marshall MG15 Modding project to make myself a speaker cable. Since everybody says that the Neutrik plugs, I devided to give them a chance. They arrived in 3 parts. The plug itself, a black backplate which covers the solder area and the round thing through which the cable goes into the plug. The solder areas are very big so a person who is a rookie in soldering can do it. The sound quality is very good and the build quality too. These are in my opinion the best plugs you can get for low money.
0
0
Report
