I
Very low - customised mine
The suppiled height of the nano+ is VERY low.
No way was i going to be able to use my TRex Chameleon power supply without losing half the pedal space!
So I carefully drilled off the supplied feet, fitted 4 appropriate jack nuts and bolted on some 25mm rubber feet.
The nano+ is TRANSFORMED.
I now have enough height to place the TRex Chamelon under the board.
On top I'm running a polytune mini, a BBS octoStomp a custom made analog chorus (Boss CEB1 clone) and a DHA VT1 Mk2 DI......perfect bass board.....
The supplied case isn't really sufficient. The zip is really fragile.
The DHA pedal has a valve exposed on one edge which can get smashed easily. The supplied soft case offers NO protection to such a pedal,
I'm struggling to find a hardcase (with foam inserts) to accomodate my newly raised nano+ which ideally I need to protect the exposed glass on my board. Any recommendations? (internal dims required 470 x 140 x 130 minimum)
It would've made so much more sense for Pedaltrain to supply the nano+ with raised feet to start with....
No way was i going to be able to use my TRex Chameleon power supply without losing half the pedal space!
So I carefully drilled off the supplied feet, fitted 4 appropriate jack nuts and bolted on some 25mm rubber feet.
The nano+ is TRANSFORMED.
I now have enough height to place the TRex Chamelon under the board.
On top I'm running a polytune mini, a BBS octoStomp a custom made analog chorus (Boss CEB1 clone) and a DHA VT1 Mk2 DI......perfect bass board.....
The supplied case isn't really sufficient. The zip is really fragile.
The DHA pedal has a valve exposed on one edge which can get smashed easily. The supplied soft case offers NO protection to such a pedal,
I'm struggling to find a hardcase (with foam inserts) to accomodate my newly raised nano+ which ideally I need to protect the exposed glass on my board. Any recommendations? (internal dims required 470 x 140 x 130 minimum)
It would've made so much more sense for Pedaltrain to supply the nano+ with raised feet to start with....
0
0
Report
A
Portable option
Using this pedalboard for some bass effects and I have a quite small setup. The only thing that bugged me about this pedalboard is the fact that I had to replace the feet to acomodate my power supply fitting underneath, it seems that pedaltrain want you to buy their own power supplies to be used. Other than that, the unit is very sturdy and feels like it'll last forever, the finish is great also and all the velcro, cable wraps etc. are included and are of good quality.
0
0
Report
