pro snake TPD-3 1 FM

Professional DMX Cable

  • With black 3 pin XLR plug
  • Length: 1 m
  • Impedance: 110 Ohm
  • Capacity: 72 pf
  • Cross-section: 2x 0,25 mm²
  • PE Insulation
  • Braided Shielding: 16
  • PVC Outer sheath
  • Diameter: 6,0 ± 0,2 mm
  • Colour: Black
  • Note: Cable tie not included in delivery

Further Information

Colour black
Length [m] 1,0 m
Connector 1 3 pin XLR (male)
Connector 2 3 pin XLR (female)

These are other customers' choices:

Customers who looked at this item have bought these:

pro snake TPD-3 1 FM
42% bought this exact product
pro snake TPD-3 1 FM
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$3.69 Add to Basket
pro snake TPD-3 2 FM
16% bought pro snake TPD-3 2 FM $4.26
pro snake TPD-3 0,5 FM
6% bought pro snake TPD-3 0,5 FM $3.60
pro snake TPD-3 5 FM
5% bought pro snake TPD-3 5 FM $7.10
pro snake TPD-3 10 FM
5% bought pro snake TPD-3 10 FM $9
Our most popular DMX and Control Cables
1027 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.7 / 5.0
  • quality
201 written ratings Read all reviews
Total
quality
Good budget DMX cables.
21.01.2017
These cables do the job and transmission occurs without errors.

The cable itself is of reasonable quality with foil and braid shields. The soldering of the connector looks clean and tidy and pins 2 & 3 have heatshrink over the soldering points which shows an attention to detail beyond their budget price.

The only issue is the connectors - namely because they are in line with the budget pricing - at this price point it would be unreasonable expect Neutrik which (each) cost almost as much as this entire product.

So the places the connector is less than great - the screw thread for the cover can get damaged - the connector is in the usual two parts - the main body is metal, and the rest of it is metal with a flexible rubber strain relief. This means the screw thread is not plastic to metal but metal to metal - this can be where issues can arise. Additionally the strain relief just ends in a hole rather than a more supportive "boot".

That said - you can't expect more for the price and in practice it doesnt make much difference - if you are using the cable such that the strain relief or connector is an issue you may need to look at another product - if you are more conservative with your use and do not abuse you cables then these will work very well for you and will quite happily gig without failure.

At the price they are an absolute bargain.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great Cable, Great Price!
Rob H.B, 26.04.2018
Only got one of these cables as its only used for patch our lighting desk to the wall patch then off to the buffer then to the rig!

Very good quality cable with a strong connector, could see this cable lasting for years, no problems with it, all round great cable!!

Worth a buy defiantly, i plan to get more as they are very handy to have when patching a desk or when you have lights that are close together and do not want to use a 3m cable!!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Length [m]: 1,0 m
pro snake TPD-3 1 FM
(1028)
pro snake TPD-3 1 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 1 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 1,0 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
pro snake TPD-3 2 FM
(914)
pro snake TPD-3 2 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 2 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2 x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 2,0 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
pro snake TPD-3 5 FM
(597)
pro snake TPD-3 5 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 5 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2 x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 5,0 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
pro snake TPD-3 10 FM
(729)
pro snake TPD-3 10 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 10 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 10,0 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
pro snake TPD-3 0,5 FM
(537)
pro snake TPD-3 0,5 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 50 cm, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 0,5 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
pro snake TPD-3 20 FM
(452)
pro snake TPD-3 20 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 20 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 20,0 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
pro snake TPD-3 15 FM
(202)
pro snake TPD-3 15 FM

Professional DMX Cable With black 3 pin XLR plug, Length: 15 m, Impedance: 110 Ohm, Capacity: 72 pf, Cross-section: 2x 0,25 mm², PE Insulation, Braided Shielding: 16 , PVC Outer sheath, Diameter:...

  • Colour: black
  • Length [m]: 15,0 m
  • Connector 1: 3 pin XLR (male)
  • Connector 2: 3 pin XLR (female)
$3.69 €3.28
Plus $33.80 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
All connected!
With the Cableguy you will find your cables easily and com­fort­ably!
Find cables
* The prices shown exclude VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
(4)
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

Recently Viewed
Mooer GE 300

Multi-Effects Processor Integrated ToneCapture function with 4 modes (Amp / Stomp / Guitar / Cab) to capture the sound of your favourite gear, 108 High quality amp simulations, 43 IR (Impulse Response) speaker cab simulations, Support for additional Impulse...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

(3)
Recently Viewed
TC Electronic Polytune 3 Noir

Tuner for Electric Guitar Polyphonic tuner and buffer, Bonafide buffering gets the sound through long cable runs and multiple effects, Polyphonic tuning makes it possible to tune all the strings simultaneously, Fast chromatic tuner with 0.5 cent accuracy, Precise...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

Passive Full-Range Speaker Rated power: 300 watts (RMS), Equipped with: 12" Woofer and 1" driver with 1.5" Mylar diaphragm, Impedance: 8 ohms, Maximum level: 127 dB, Dispertion pattern: 90° x 60°, Input and output: Speaker Twist, Plastic housing, 4...

Recently Viewed
iZotope Neutron 3 Standard Crossgrade

iZotope Neutron 3 Standard Crossgrade (ESD); channelstrip plugin; crossgrade valid for each registered iZotope product (except DDLY, Moebius and all free plugins); Visual Mixer and Relay display the entire sound stage of the mix and allow to control individual tracks;...

Recently Viewed
ADJ Contour

ADJ Contour; LED mirror ball effect; multi-colored beams crisscross back and forth at different speeds similar to a classic "fan style" effect; 36 lenses that project multi-colored beams of light from 27x 1.5W RGB LEDs; 15 built-in lightshows; controlled by...

(1)
Recently Viewed
Magma DJ Controller Case Prime 4

Magma DJ Controller Case Prime 4, flight case suitable for Denon Prime 4, Heavy duty construction of 9 mm vinyl laminated plywood, Solid aluminum profiles and spring loaded latches, Secure stacking due to stackable ball corners, Full padded interior keeps...

(2)
Recently Viewed
Jazzlab saXholder PRO

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

Recently Viewed
Fender CLSC SRS Mustang/Duo Case

Guitar Case Hardshell case for Fender Mustang/Duo Sonic models, Lining on the inside: Red plush, Vinyl wrapped steel core carry handle, Large storage compartment with lid, Steel draw latches, 1 Locking latch with key set, Internal dimensions: 100.33 cm...

Recently Viewed
iZotope Music Production Suite 2.1 CG2

iZotope Music Production Suite 2.1 Crossgrade 2 (ESD); plug-in bundle; crossgrade from iZotope Music Production Suite 2 or RX Post Production Suite 3 to Music Production Suite 2.1; extensive collection of software tools for music production, mixing and mastering; contains...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.