s
It solved everything!
Laptop audio for a PA setup, without a mixer... not an easy task! This cable solved the problem!
Running an unbalanced 3.5mm stereo jack from my laptop into my crossover, I decided to go for this Y-cable splitter, which splits the stereo signal to 2x mono 6.3mm TS female jacks. From there, I run two long 6.3mm TS (male) into male XLR cables, for maximum flexibility. If needed, I can switch to pure TS cables for a mixer input, no problem!
Build quality - ideal for the price! It came with a small MXP1015 cable tie on the splitter part, as strain-relief (which is a welcome surprise)! Connectors are sturdy, cable is soldered professionally.
Thumbs up!
Running an unbalanced 3.5mm stereo jack from my laptop into my crossover, I decided to go for this Y-cable splitter, which splits the stereo signal to 2x mono 6.3mm TS female jacks. From there, I run two long 6.3mm TS (male) into male XLR cables, for maximum flexibility. If needed, I can switch to pure TS cables for a mixer input, no problem!
Build quality - ideal for the price! It came with a small MXP1015 cable tie on the splitter part, as strain-relief (which is a welcome surprise)! Connectors are sturdy, cable is soldered professionally.
Thumbs up!
0
0
Report
k
Essentieller Adapter für Recording
Für Hi-Z Inputs an einem Stereo Audio Interface (PC) gekauft und funktioniert tadellos!
0
0
Report
NA
quality item, recomended
This is a high quality cable. I got the shortest version but i think longer models are available at the same price [!] if you need that.
All the connectors are metal & unscrewable for maintainance [not sealed/ moulded].
The cable is 5.5mm diameter and has a quality soft rubber feel to it. the inline 1/4" jack sockets are colour coded with red & black idents.
The mini jack is a gold colour.
Interestingly the 1/4" sockets are stereo, with the middle ring unconnected. If you wanted to add a resistor to create a pseudo differential signal, it would be very easy to do.
All the connectors are metal & unscrewable for maintainance [not sealed/ moulded].
The cable is 5.5mm diameter and has a quality soft rubber feel to it. the inline 1/4" jack sockets are colour coded with red & black idents.
The mini jack is a gold colour.
Interestingly the 1/4" sockets are stereo, with the middle ring unconnected. If you wanted to add a resistor to create a pseudo differential signal, it would be very easy to do.
0
0
Report
A
Nice one
Using it to plug 2 mics into my portable recorder(DR-05), like two lav-mics or lav+shotgun combo(don't mix powered and non-powered mics- that ain't gonna work).
Pros:
1)Price/value is great;
2)6,3mm female jacks are color coded;
3)Built quality is good.
Cons:
Non yet.
Final thoughts:
If you need to plug two mics in a recorder(or camera) with one stereo 3,5mm input, this is what you should have.
Pros:
1)Price/value is great;
2)6,3mm female jacks are color coded;
3)Built quality is good.
Cons:
Non yet.
Final thoughts:
If you need to plug two mics in a recorder(or camera) with one stereo 3,5mm input, this is what you should have.
0
0
Report
V
Works fine, seems sturdy enough.
0
0
Report
S
Works flawlessly
I'm using this cable to split out a mono signal from the stereo signal coming from my DAW (Reaper) and feed that into my amp's fx loop receive - which allows me to play my whole Positive Grid BIAS chain through a standard cab. Works (and sounds) perfectly.
0
0
Report
MC
Finest Quality
This cables is very high quality. Can recommend to anyone.
I'm using as a send and return for a compressor sidechain.
I'm using as a send and return for a compressor sidechain.
0
0
Report
a
solid
It's a sturdy y-cable to combine separate mono into stereo. No quality issues and no signal loss. I like it.
0
0
Report
