Z
Rockbag need to remeasure!
Ok, this cover has one job to do, thats to cover a Vox AC30 or a Vox AC15C2. The dimensions are 100% correct, however the left and right handle holes do not match up correctly, this is a bad mistake from Rockbag, how hard is it to get the measurements 100%?
Also, the cover could be 2cm longer to ensure it covers the whole Amp. If you need a dustcover for your Vox I would recommend it, but only for home use. The material is heavy duty and waterproof.
If you need to transport your Vox Amp to and from gigs/practice I highly recommend you get a hard case for it. This cover is only for home use.
Maybe Thomann could make their own version of this cover? Thomann covers are first class.
Also, the cover could be 2cm longer to ensure it covers the whole Amp. If you need a dustcover for your Vox I would recommend it, but only for home use. The material is heavy duty and waterproof.
If you need to transport your Vox Amp to and from gigs/practice I highly recommend you get a hard case for it. This cover is only for home use.
Maybe Thomann could make their own version of this cover? Thomann covers are first class.
0
0
Report
DK
AC30 TBX
I got this cover for my Korg era TBX. It's fine for keeping the dust off the amp but you may need something sturdier for gigging. I must note that this cover is made for the more recent AC30 models and the holes in the cover for the handles did not line up exactly with my amp.
0
0
Report
B
Holes dont fit handles
So the cover itself is very thick and high quality however the cutout holes on it dont really match the ac30s handles and the cover doesn't really go all the way over the amp
0
0
Report
C
Good quality, but not really fitting
Bought this Cover for my 1965 Vox AC 30 2x12. The quality is good and it doesnt smell like plastic this long, but the holes for the handle bars do not fit. Only the hole for the middle handle bar does fit.
0
0
Report
A
Handle holes do not match VOX AC30C2
The handle holes did not match the handles on my VOX AC30C2 but it works OK.
0
0
Report
D
Rockbag
This cover is a snug fit on the amp. it is quite difficult to get on the amplifier as you have to incrementally pull the cover down the amplifier each side a little at a time. The top of the cover has holes for the amp handles but these holes allow for dust to settle on the control panel which is not ideal. A smaller cover on the top of this cover would properly stop dust from setting on all the dials and switches. Hard cases for these amps are expensive so this is a cheap option. If I could I would buy one which covers the control panel better. This one is not really ideal.
0
0
Report
