M
finally THE MIDI cable
i juggle with midi and midi cables since 15 years and this is the most useful and surely definitive solution for cable management.
no ONE midi device has the midi plugs in the same mounting direction, so when you get a L cable bear in mind you are just lucky if the L goes the way you want.
straight midi plugs need a lot of real estate , and in a pedalboard you can be out of that space quickly. this is genial, you can plug the cable and just turn it the way you need it to go (obviously in the two direction possible, up or down, or left or right , depending how the midi plug on your device is mounted)
the best midi cable i foud until today. the only thing better would be a rotating cable-bender like the one mounted on this but 360 degree. that would be priceless.
no ONE midi device has the midi plugs in the same mounting direction, so when you get a L cable bear in mind you are just lucky if the L goes the way you want.
straight midi plugs need a lot of real estate , and in a pedalboard you can be out of that space quickly. this is genial, you can plug the cable and just turn it the way you need it to go (obviously in the two direction possible, up or down, or left or right , depending how the midi plug on your device is mounted)
the best midi cable i foud until today. the only thing better would be a rotating cable-bender like the one mounted on this but 360 degree. that would be priceless.
2
0
Report
D
Keep your cables under your board
Very helpfull construction,allows you to set an angle connector the way it fits with your pedal's midi ports. No matter if the pins of your device are in "smile" or "eye brow" shape, you can turn the connectors to any direction you like, by using a screw driver. In this way,not only you keep a clean board,but you also ensure that your connectors will live forever. For the midi users it's a must!
0
0
Report
b
Sturdy and versatile
I needed short MIDI cables for creating a chain of various equipment in limited space. The cable length and rotating connectors fit the task perfectly. The small screws can be loosened for easier bending of cord, than tightened again. The MIDI connectors are sturdy, collar and pins are firmly set in plastic.
0
0
Report
e
Great for tight spaces
I have bought several of these cables for my portable ultralightweight dawless setup.
The space is premium, so I needed shortest possible MIDI plugs available with the ability to select the orientation of the pins - some gear has pins on the top, some on the bottom.
These cables (They as well have 30 cm version) are rock solid, easy to setup.
Might seem a little bit pricey, but couldn't find anything else to suit my needs cheaper, so that's that.
The space is premium, so I needed shortest possible MIDI plugs available with the ability to select the orientation of the pins - some gear has pins on the top, some on the bottom.
These cables (They as well have 30 cm version) are rock solid, easy to setup.
Might seem a little bit pricey, but couldn't find anything else to suit my needs cheaper, so that's that.
0
0
Report
MC
Perfect for Pedalboards.
I use these for routing midi on the pedal board, small and space saving!
0
0
Report
TG
Very good build quality
i've had it for a month now and I've had no problems with the cable so far. The whole angle thing is great but you need to have the specific tool to unscrew the bolts that enable the feature.
0
0
Report
B
Angle joints
This is best for hooking up MIDI in small tight places. HQ cable
0
0
Report
K
Very handy
It includes a little allen screwdriver which allows you to turn either plug anyway you want.
0
0
Report
C
Perfect
Perfect cable, the hinge contraption works great for cable organisation.
0
0
Report
BH
Excellent cable
Flexable, adaptable, and the pin section is plenty long enough for units that may be recessed. I highly recommend these.
0
0
Report
