y
Great Quality for price
Use:
I have been it between my T Amps and QU-24 Mixer from A&H
So it is used to carry my mix output signal to my amps
Pros:
Very good quality and build for it's price range
Does not have feedback/humming and I have been using it for over a year
Good plain solid cables
Cons
As for handling, the female connector part is a bit too tight. You could damage the connector if not careful
I would just slightly loosen the female connector to make it easier to remove as well
I have been it between my T Amps and QU-24 Mixer from A&H
So it is used to carry my mix output signal to my amps
Pros:
Very good quality and build for it's price range
Does not have feedback/humming and I have been using it for over a year
Good plain solid cables
Cons
As for handling, the female connector part is a bit too tight. You could damage the connector if not careful
I would just slightly loosen the female connector to make it easier to remove as well
0
1
Report
T
Studio Use
I use a couple of these in the studio, one for going to the drums and another to miscellaneous mics. Long enough to get where I need them to go and well built.
Pros & cons - No cons at this price. The numbers help to know where you are and the build is good quality. There's no point spending 4x this price on a loom unless you're touring it, so for studio use it's perfect.
Will buy again and again.
Pros & cons - No cons at this price. The numbers help to know where you are and the build is good quality. There's no point spending 4x this price on a loom unless you're touring it, so for studio use it's perfect.
Will buy again and again.
1
0
Report
IG
Bang for the bucks
Overall great studio multi-core cable. Low price and comparable to much higher priced cables. Its soft so it easy to handle. XLR connectors are not Neutrick but for studio installation i think its great and if you dont unplugged all the time it will last. For live application i recommend that you use something with neutrick XLR
1
0
Report
J
Serves its purpose for a good price
No problems with sound. Serves its purpose for a good price. The cables and connecters feel robust and can take much re-patching. I have at least 5 of these, used in studio and live setting. None of them have broken on me yet. Personally the split off of the cable could be a little longer, to achieve a wider patch, but that would be my only criticism. Numbers could be more obvious. As a colour blind person, the colours can often take a second glance but the numbers are written on the wires themselves if you look closely enough.
If what you need is an 8 channel xlr-xlr multicore of this length, loop no further. This does the job and for a decent price.
If what you need is an 8 channel xlr-xlr multicore of this length, loop no further. This does the job and for a decent price.
0
0
Report
S
A very useful item of kit...
Just recently we've added an XLR splitter to the mixer-end of our existing multicore. One set of outputs from the splitter now goes to a Behringer UMC1820. And the other set of outputs from the splitter goes to the mixer - that's what we're using this 8-channel multicore for. And it does the job perfectly! It's a quality product at a good price. Plus it's robust without being heavy or bulky. Thanks Thomann.
0
0
Report
PL
Unbeatable for the price
Just imagine, you have a 8-cable 3 meters multicore for the price of two XLR cables.
Currently I use it in the studio as a connection between the interface in the control room and the recording room.
It's really well made, numbers are printed on the XLR plugs and cables.
It's also usable as a short multicore on stage (drums to x32 rack for example).
Only minor issue is the plastic packing bag, it's unusable.
Currently I use it in the studio as a connection between the interface in the control room and the recording room.
It's really well made, numbers are printed on the XLR plugs and cables.
It's also usable as a short multicore on stage (drums to x32 rack for example).
Only minor issue is the plastic packing bag, it's unusable.
1
0
Report
JG
Amazing Low Cost Snake
I'm sure their are a lot better snakes out there for much more money but I was looking for a low cost solution to connect my interface to my XLR patch points and this was a great solution. Haven't experienced any issues and this has been working perfectly.
0
0
Report
D
Perfect
Maybe not for live use, but perfect in my home studio
0
0
Report
SA
Excellent multi ..
When I was building my home studio bought 6 of them 4 for booth to console signal transfer and two for control to booth signal transfer ... they are excellent.
0
0
Report
P
Cheap loom
Great to have for a live show (I bought 2) if you're running multiple outputs from your soundcard. The connectors are numbered and seem to be of good quaility.
0
0
Report
