N
Matches Specs. Good Value. Not ideal for AT2020. May cause damage.
The shock mount is exactly as advertised. Bought it to use with an AT2020, it was a tight squeeze but does work, but in fair the dimension given by Thomann are correct so no complaints I knew what I was getting.
As per previous reviews, the edges of the clamp mechanism may scrape the paint work of any mic as you put it in so be careful.
All in all it is good quality for the price and functions well as per description.
As per previous reviews, the edges of the clamp mechanism may scrape the paint work of any mic as you put it in so be careful.
All in all it is good quality for the price and functions well as per description.
2
0
Report
I
Good enough.
This is a product which is made of metal, does its job properly, filters out mic stand rumble effectively and will stretch to fit mics of a wide range of sizes.
It's good to have a spare few of these knocking around and as its metal it will last a good while.
I found that it's operation was greatly improved by some extra lubrication - I sprayed a little silicon grease onto all the moving parts and now it has a more positive movement and you can gauge the tightness better as it is less scratchy. It's als easier to tighten it tighter once lubricated.
It will hold larger bodied condensers like my rode NT1a or a pure XIX and I imagine it could handle heavier mics too.
It comes with a U.S.-EURO mic stand three adapter which I'm not sure if that was mentioned in the description.
It's good to have a spare few of these knocking around and as its metal it will last a good while.
I found that it's operation was greatly improved by some extra lubrication - I sprayed a little silicon grease onto all the moving parts and now it has a more positive movement and you can gauge the tightness better as it is less scratchy. It's als easier to tighten it tighter once lubricated.
It will hold larger bodied condensers like my rode NT1a or a pure XIX and I imagine it could handle heavier mics too.
It comes with a U.S.-EURO mic stand three adapter which I'm not sure if that was mentioned in the description.
1
0
Report
G
Good shock mount for the money
It's simple to use and great quality.
Only downside is that the tightening mechanism is coming loose all the time even after removing the washers around it.
Only downside is that the tightening mechanism is coming loose all the time even after removing the washers around it.
0
0
Report
a
There is no competitor for this money at all!
0
1
Report
J
Does The Job Well!!
So a friend who I have been working with on a few recent projects has this one, and about a year ago I bought an original baby blue bottle, however it did not come with a shock mount and since it arrived I have hired shock mounts from my old uni and borrowed the one of my friend. I needed one of my own for now and settled on this one. It arrived and placed the blue into it. Perfect fit, very snug. It definitely won't fall out of this one. Although its one of the cheapest ones you do, it does what I need it to do. Could end up buying another one at a later stage as an emergency/spare!! As always guys thanks for helping a brother out!
0
0
Report
F
Perfectly good shockmount, bargain
Absorbs shock noise well and holds mic steady, had no issues in my home studio set up.
It holds the mic in place with friction in a padded cylinder type thing, so check that it is the correct size for your microphone before you buy.
It holds the mic in place with friction in a padded cylinder type thing, so check that it is the correct size for your microphone before you buy.
0
0
Report
I
Okay for home studio use.
It's okay for the price you pay for it.
The quality is not going to rock your world, but it is not awful.
I bought this for my home studio and it works just fine, but I never touch it, pack it away, or move it too much. It would probably be different, If I had to adjust it all the time, move it, take it off, or put it back on again.
If you're looking for something more professional, I would recommend paying a bit more for one, but If you need something basic, that works just fine, its perfect for that!
The quality is not going to rock your world, but it is not awful.
I bought this for my home studio and it works just fine, but I never touch it, pack it away, or move it too much. It would probably be different, If I had to adjust it all the time, move it, take it off, or put it back on again.
If you're looking for something more professional, I would recommend paying a bit more for one, but If you need something basic, that works just fine, its perfect for that!
0
0
Report
t
Good for the money
For most of the t.bone stuff I have bought the quality is good especially for the money. This was a generic microphone holder tht I bought for a Mic tht I picked up in the USA that came without one (it was second user mic).
So the need for this arose... and it did the job just fine. The specific shock mount for the mic that I had was substantially more money so I saw this as a bargain really.
So the need for this arose... and it did the job just fine. The specific shock mount for the mic that I had was substantially more money so I saw this as a bargain really.
0
0
Report
t
Decent Quality Affordable LD Shockmount
Feels and looks more expensive than a ?10 mount and does the job just fine for home studio recording purposes.
Con's:
Slightly smaller diameter than I'd expected, but does the job just fine.
No spare elastic, but at this price that's not a huge problem.
Con's:
Slightly smaller diameter than I'd expected, but does the job just fine.
No spare elastic, but at this price that's not a huge problem.
0
0
Report
MT
Very good
this is my 2nd time to both this. its nice product for a price.
0
1
Report
