F
not very good, but unbeatable price
It's stable and stackable enough, and the plastic is solid enough.
The problem is the screw holes: they don't age well and can't be changed. I would recommend this case as a single-use one (after all, it is twice cheaper as the cheapest alternative) : it's fine if you install gear in it once for all, but it won't survive swapping its content around more than a few of times.
The problem is the screw holes: they don't age well and can't be changed. I would recommend this case as a single-use one (after all, it is twice cheaper as the cheapest alternative) : it's fine if you install gear in it once for all, but it won't survive swapping its content around more than a few of times.
0
0
Report
A
Does the job, but loose-ish clips for front and back
I bought this to fit a Kemper Profiling Amp rack, while leaving some space inside for the accessories (cables, remote) in the back, and also allowing a bit of space for other potential gear (e.g. wireless). It's the perfect size for this.
It's light, cheap and does a perfectly decent job at all that.
Unfortunately though, the front and back pieces don't clip on too tightly. They don't do a brilliant job at staying on - a knock can quite easily make one of them fall off. This is quite a downer for this kind of product, which is designed to keep expensive gear safe.
It's light, cheap and does a perfectly decent job at all that.
Unfortunately though, the front and back pieces don't clip on too tightly. They don't do a brilliant job at staying on - a knock can quite easily make one of them fall off. This is quite a downer for this kind of product, which is designed to keep expensive gear safe.
0
0
Report
N
rack case
The over all build quality is ok. the handles havent been a problem yet but i think they will be the first part to give way. the case itsself bends a little so the covers need to be pushed into place before locking. i dont mind this very much because it is a very light fight case and you cant have everything. the major issue with this is the use of non standard rack bolts. i belive they are M5 and the standard is M6 which means you need specific bolts for this case. this may or may not be an issue depending on the amount of racking and unracking you do. I was not supplied with enough bolts to rack all my equiptment. and had to be sent addition one for free from thomann.
0
0
Report
S
Works
This things does the job but feel very fragile and sketchy. I would put units that cost more than 200€ in it on the road. Work fine if it's just for static studio usage though.
0
0
Report
J
4U rack case
excellent case has connectors on the front and back which is great as when i put my XS radio mics in i could put in a back panel to slide my mini multicore into,and the drawer i got aswell is also perfect a great buy!!
1
1
Report