Z
very sturdy hardcase
My only problem I have with this item is that over time, the middle rod section of the case will start to bend out of shape, not a major thing, however, it won't close properly as there's a slot to keep the rod in place on the top cover.
Weight of the item kind of gets heavy overtime, especially if you have a short firgure like myself. i find myself skimming the bottom part of the case a couple of times due to size of the item. but no complains on it as i know its a 22 inch case. Was expecting that already.
If you plan on using this as a travelling case, i suggest you look for other brands, however if you just want a case to store your cymbals and not lug them around as much, then this will be practical.
I store 2 crashes, 1 ride and a Hi hat. it gets a little crowded if you add more but it can be done with some sitting on.
Overall its a cheap case with good sturdy material on the outside but not for the gigging drummer. i ended up buying another case after this one.
Weight of the item kind of gets heavy overtime, especially if you have a short firgure like myself. i find myself skimming the bottom part of the case a couple of times due to size of the item. but no complains on it as i know its a 22 inch case. Was expecting that already.
If you plan on using this as a travelling case, i suggest you look for other brands, however if you just want a case to store your cymbals and not lug them around as much, then this will be practical.
I store 2 crashes, 1 ride and a Hi hat. it gets a little crowded if you add more but it can be done with some sitting on.
Overall its a cheap case with good sturdy material on the outside but not for the gigging drummer. i ended up buying another case after this one.
0
0
Report
m
Demasiado pesado com todos os pratos que diz levar. O "travão" que segura os pratos no sitio não durou 1 utilização, o ponto positivo é que realmente protege os pratos dos elementos exteriores, fez uma viagem de avião Portugal/Londres e vice versa e os pratos sempre impecáveis.
0
0
Report
GA
Not bad, but not great
Simply put, why not just use an 8mm bolt and supply a sleeve with it. The centre post is very thick (around 12mm) with no protection. After putting cymbals on, the odd clamp doesn't fit nicely inside the bell of a cymbal, a wingnut would do a much better job. Also to protect the cymbals from the clamp I've had to use a hi-hat stand washer, and file the hole on that out to fit the post. Having said that, it's far better than a soft case, however for slightly more money you could have the much better Gator version which I full prefer.
0
0
Report