R
Better build quality
I bought this to replace a bent tuning peg on a Warwick Corvette I bought secondhand. The bend wasn't allowing the nut to seat correctly, and wouldn't tighten up properly.
The replacement is exactly the same, except for the threaded nut section. On the original part, the thread had a milled flat section on it, the new part doesn't have this, but is a continuous thread. This gives a more positive, smoother threading action, and the thread itself doesn't have the 'rough' feel when hand-tightening it that the original had.
I went and replaced all four tuning heads, as another user gave feedback mentioning a better build quality - which I would go along with after comparing the original & new parts.
The replacement is exactly the same, except for the threaded nut section. On the original part, the thread had a milled flat section on it, the new part doesn't have this, but is a continuous thread. This gives a more positive, smoother threading action, and the thread itself doesn't have the 'rough' feel when hand-tightening it that the original had.
I went and replaced all four tuning heads, as another user gave feedback mentioning a better build quality - which I would go along with after comparing the original & new parts.
0
0
Report
P
Great tuner
I bought this to replace an original Warwick tuner where the securing nut popped out of the thread once the string was brought up to tension. The new one has a beefier nut that means that this won't happen again. The tuner itself is excellent. It is very smooth in action and I find that it is easy to find the right tuning whether going up or down towards the target note. I have another bass with Fender-style tuners and I have to tune down below the target note and then tune back up again towards it in order to get it right. With the Warwick tuners this isn't an issue, the smallest change in either direction results in an immediate and held change in pitch. Brilliant.
0
0
Report
K
The best for the job
Very good quality and smooth rotation.
0
0
Report
m
very good
very accurate tuning machine I had to use to replace Jack & Danny very bad ones. Unbeatable price/quality ratio! A must have if you ask me, even if you don't ask, lol!
But... it could be better if the dimensions were shown! By chance it fitted to my bass, but to make no error you're better with the measures.
But... it could be better if the dimensions were shown! By chance it fitted to my bass, but to make no error you're better with the measures.
0
0
Report
A
small but tough
This piece of equipment is small but quite surprise how it can handle those bass strings after fitting it. My only fault was I bought a right fit as I wasn't sure if it meant to be right handed player or for left handed players. Only to figure out that it was intended for left handed player instruments so there you go. Apart from that, it is tough piece of equipment that won't take much space.
0
0
Report
B
Very good Wawrick bass tuner
As with all Warwick products, they are very reliable and have a good action.
The machine heads have a great finish and seem to have a high manufacturing quality. Excellent as a replacement or on a new build.
On a side note make sure you order tuner for the correct side of the headstock!
The machine heads have a great finish and seem to have a high manufacturing quality. Excellent as a replacement or on a new build.
On a side note make sure you order tuner for the correct side of the headstock!
0
0
Report
G
A Perfect suit for my Warwick
Initially, I was a little hesitant to buy this, but it did fit perfectly to my Warwick Corvette Bass.
0
0
Report
A
Great price for genuine original parts!
What more can I say other than it replaced my original broken part exactly like for like! Great quality original parts at a great price!
0
0
Report
M
Great product
Having musical instruments and kids in a house is a hard thing. If your kids push your bass on the ground - this is a great replacement part! Fits perfectly, even works better than the originals on my Ibanez.
0
0
Report
