Work LW 290 D Truss Lift 290kg 6,6m

Telescopic Lifter

  • Certified according to DGUV V17 / 18 (BGV C1) and already prepared for the new DIN 56950-3
  • WIRE DRIVE for a perfect and material-saving cable winding, as required by DIN 56950-3
  • With the optional DYNSYS hand crank (not included), the LW 290 D also meets the requirements of DIN 56950-3
  • DYNSYS prevents overloading of a lift by the user
  • Previously, the exact determination of the dynamic load was not possible, except by concrete calculation and the corresponding calculated variable reserves
  • Depending on the lift used, DYNSYS is set exactly to the maximum load and, similar to a slipping clutch, blocks the lifting process in case of overload
  • DYNSYS guarantees a maximum load of 15 kg at the hand crank at all times
  • Surface coating: Black lacquer finish
  • Matching truss receiver Work AW-150: Article no. 170156 (not included)

Technical Data:

  • Sections: 5
  • Telescopic elements: 4
  • Material: Steel
  • Load max.: 290 kg
  • Load min.: 25 kg
  • Height max.: 6.6 m
  • Height min.: 1.8 m
  • Tube attachment diameter: 50 mm
  • Stand area: 1.8 x 1.8 m
  • Transport Height: 1.8 m
  • Transport area: 0.5 x 0.5 m
  • Transport weight: 184 kg
  • Transport wheels: 4 + 3

Further Information

Construction type Telescope lift
Max. Load 290,0 kg
adapter / recording type 50 mm
max. height 6,6 m
max. height: 6,6 m
Work LW 290 D Truss Lift 290kg 6,6m
Work LW 290 D Truss Lift 290kg 6,6m

Telescopic Lifter Certified according to DGUV V17 / 18 (BGV C1) and already prepared for the new DIN 56950-3, WIRE DRIVE for a perfect and material-saving cable winding, as required by DIN 56950-3,...

  • Construction type: Telescope lift
  • Max. Load: 290,0 kg
  • adapter / recording type: 50 mm
  • max. height: 6,6 m
Work LW 155 D Truss Lift 150kg 5,3m
(1)
Work LW 155 D Truss Lift 150kg 5,3m

Telescopic Lifter Sections: 4, Extendible profiles: 3, Material: Steel, Max. load: 150 kg, Min. load: 25 kg, Max. height: 5.3 m, Min. height: 1.7 m, Tube receiver: 35 mm, Dimensions of the...

  • Construction type: Telescope lift
  • Max. Load: 150,0 kg
  • adapter / recording type: 35 mm
  • max. height: 5,3 m
Work LW 150 D Truss Lift 100kg 5,0m
Work LW 150 D Truss Lift 100kg 5,0m

Telescopic Lifter Certified according to DGUV V17 / 18 (BGV C1) and already prepared for the new DIN 56950-3, WIRE DRIVE for a perfect and material-saving cable winding, as required by DIN 56950-3,...

  • Construction type: Telescope lift
  • Max. Load: 100,0 kg
  • adapter / recording type: 35 mm
  • max. height: 5,0 m
Work LW 142 D Truss Lift 100kg 4,1m
Work LW 142 D Truss Lift 100kg 4,1m

Telescopic Lifter Sections: 3, Extendible profiles: 2, Material: Steel, Max. load bearing capacity: 100 kg, Min. load bearing capacity: 25 kg, Max. height: 4.1 m, Min. height: 1.6 m, Tube receiver:...

  • Construction type: Telescope lift
  • Max. Load: 100,0 kg
  • adapter / recording type: 35 mm
  • max. height: 4,1 m
Work LW-130 Truss Lift 100kg
(11)
Work LW-130 Truss Lift 100kg

Lighting stand The wind-up LW-130 stand by WORK can be extended in two stages up to 3.10 m and locked. It carries loads of up to a max. of 100 kg and stability is ensured by the 3 legs. The stand...

  • Construction type: Wind Up lift
  • Max. Load: 100,0 kg
  • adapter / recording type: 35 mm
  • max. height: 3,1 m
Work LW 265 D Truss Lift 220kg 6,5m
Work LW 265 D Truss Lift 220kg 6,5m

Telescopic Lifter Sections: 5, Extendible profiles: 4, Material: Steel, Max. load bearing capacity: 220 kg, Min. load bearing capacity: 25 kg, Max. height: 6.5 m, Min. height: 1.8 m, Tube receiver:...

  • Construction type: Telescope lift
  • Max. Load: 220,0 kg
  • adapter / recording type: 40 mm
  • max. height: 6,5 m
$1,819 €1,678.99
Plus $48.80 shipping

The price in USD is a guideline price only!

In stock within 8-9 weeks
In stock within 8-9 weeks

This item is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
Recently Viewed
TC Electronic Plethora X5

TC Electronic Plethora X5; Effects Pedal for Electric Guitar & Bass; Flexible & Easy to use TonePrint pedal board; 127 customizable Board memory Presets consisting of up to 5 Toneprint Pedals; 75 Toneprint FX Memory Presets per Pedal including Hall...

Recently Viewed
Fender Mustang GTX100

Modelling combo for electric guitar Mustang series, 1 Channel, Power: 100 watts, Equipped with: 12" Celestion G12FSD-100 speakers, Controls: Gain, Volume, Treble, Middle, Bass, Reverb, Master, Switch: On / Off, Effects: 40 amp models, stompbox / delay / reverb...

(1)
Recently Viewed
EVO 4

2-In/2-Out USB Audio Interface Smartgain mode, Loopback functionality, 24-Bit/96 kHz, 113 dB Dynamic range, AD/DA, 2 Combined mic/line inputs via XLR/jack combis, 2 Mic preamps with 58 dB gain, 48 V Phantom power (also during bus operation), Discrete JFET...

Recently Viewed
Vicoustic Super Bass Extreme Ult Oak

Set of 2 Bass Trap made from Acoustic Foam and Wood Bass trap designed for corner mounting, Effective low frequency absorption between 60 - 125 Hz, Maximum effectiveness between 75 - 100 Hz, A combination of membrane (transforms...

Recently Viewed
Simmons SD1200 E-Drum Set

Simmons SD1200 E-Drum Set 764 Preset sounds, 128 User sounds, 50 Preset Kits, 25 User kits, 4 Demo songs, 25 User songs, Colour LCD for effortless operation, 5x Volume faders, Metronome, Effects: Reverb, Chorus, Delay, 2-Band EQ per kit,...

Recently Viewed
Dunlop Jacquard Strap - Black Thistle

Dunlop Jacquard Strap Black Thistle; Guitar / Bass Strap; Jacquard material; Black Thistle pattern; width 5 cm; length adjustable 84 - 152 cm (33 1/16" - 59 13/16"); genuine leather ends (black)

Recently Viewed
Varytec Giga Bar HEX 3

LED Bar With 6in1 LEDs, RGBAW + UV LEDs, Easy control via supplied IR remote control or the integrated display, Metal bracket for upright and hanging mounting, Includes IR remote control for controlling the basic functions Technical specifications: ...

Recently Viewed
Toontrack SDX The Rooms of Hansa

Toontrack SDX The Rooms of Hansa (ESD); expansion pack for Toontrack Superior Drummer 3 (item 419735); produced and recorded at Hansa Tonstudios Berlin, Germany by Michael Ilbert; 4 different recording rooms: Meistersaal, Live Room, Marble Room, Vocal-Booth as well as...

(1)
Recently Viewed
EarthQuaker Devices Afterneath V3

EarthQuaker Devices Afterneath V3 Enhanced Otherworldly Reverberator; reverb effects pedal, ambient, vast, expansive, and magical reverb sounds; 9 selectable modes to change the way the Drag control functions (Unquantized, Unquantized with Slew, Unquantized Volt/Octave, Chromatic Scale, Minor Scale, Major Scale...

Recently Viewed
Arturia AudioFuse Studio

USB 2.0 Audio Interface 24-Bit / 192 kHz, 18 Inputs and 20 outputs, 4 Mic / line inputs: XLR / TRS combo socket, 4 Line inputs: 6.3 mm TRS, Phono input: Cinch, Inputs: 1 - 4 switchable for instruments,...

Recently Viewed
Simmons SD600 E-Drum Set

Electric Drum Set 336 Sounds, 35 Preset kits, 10 User kits, 3 Preset songs, 10 User songs, Metronome, Reverb, chorus, delay and flanger effects, 2x 6.3 mm Mono jack inputs for a 4th tom and a 2nd crash pad,...

(1)
Recently Viewed
Fender Mustang GTX50

Modelling combo for electric guitar Mustang series, 1 Channel, Power: 50 watts, Equipped with: 12" Celestion G12FSD-100 speakers, Controls: Gain, Volume, Treble, Middle, Bass, Reverb, Master, Switch: On / Off, Effects: 40 amp models, stompbox / delay / reverb...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.