D
Good quality but not a great deal.
This does the job it claims it does, conductive adhesive means you can use multiple strips and as long as it overlaps a little it will all be grounded.
That being said there's really not a lot of it, probably enough for one guitar but that's it, it's convenient that you can order this with your guitar and it'll arrive in the same box but you'll be paying a premium for that convenience.
If you're ordering a guitar from Thomann and that's the only guitar you want to shield this is a nice easy option but for my purposes there just wasn't enough.
That being said there's really not a lot of it, probably enough for one guitar but that's it, it's convenient that you can order this with your guitar and it'll arrive in the same box but you'll be paying a premium for that convenience.
If you're ordering a guitar from Thomann and that's the only guitar you want to shield this is a nice easy option but for my purposes there just wasn't enough.
1
0
Report
k
will buy again | low length
I bought it since the adhesive was conductive aswell to try and minimize the buzz coming from my guitar. It worked well beyond my expectations, I have no noise at all.
That being said, I had to use almost 2 pieces, and thankfully my pickguard was already shielded, otherwise I would have needed 3.
Pros:
- Easy to use
- Works extremely well
Cons:
- 1 is not enough
That being said, I had to use almost 2 pieces, and thankfully my pickguard was already shielded, otherwise I would have needed 3.
Pros:
- Easy to use
- Works extremely well
Cons:
- 1 is not enough
5
0
Report
A
Not enough for the price
This only was able to cover 75% of my Squier Bullet Mustang "swimming pool" cavity. I would suggest buying two unless you have a particularly small electronics cavity like in a backrouted guitar.
5
0
Report
ST
Shielding tape
Used this on our TE30, just enough to do a Tele, when my son pluged it in, he couldn't hear any hum coming from the guitar over the soft hum from the amp (an old fender pro 1000),
1
0
Report
k
Perfect!
The adhesive on the back of the tape is conductive as well, so I had absolutely no problems with continuity. Took a vintage bass from picking up every form of interference to one that is dead silent. Very happy with my purchase
0
0
Report
H
bon produit, mais un peu trop cher
Le produit est bon et la colle est conductive. J'aurais personnellement préféré une largeure plus grande. Par contre le prix est un peu trop élevé selon moi.
0
0
Report
S
This does the job nicely!
This is excellent shielding and good to work with.
0
0
Report
3
Does the job fine, if you’re shielding your guitar (or patching it up) it’s useful stuff - but it’s not enough to shield a whole cavity.
0
0
Report
G0
Does the trick!
Bought this for the harley benton T style diy kit
Works great although more than one and you will be safe with most guitars.
Worth the money for your own builds
Works great although more than one and you will be safe with most guitars.
Worth the money for your own builds
0
0
Report
MY
Not a lot, but it does the job
I redid the notoriously bad factory shielding job on an Ibanez Mikro bass - I needed a bit ore than one roll. There isn't a whole lot in a package, even if you don't have to cover a whole pickguard. Regardless, the adhesive works, the tape sticks and conducts and bends as it should, and working with it was quite easy.
0
0
Report