D
Good quality but not a great deal.
This does the job it claims it does, conductive adhesive means you can use multiple strips and as long as it overlaps a little it will all be grounded.
That being said there's really not a lot of it, probably enough for one guitar but that's it, it's convenient that you can order this with your guitar and it'll arrive in the same box but you'll be paying a premium for that convenience.
If you're ordering a guitar from Thomann and that's the only guitar you want to shield this is a nice easy option but for my purposes there just wasn't enough.
That being said there's really not a lot of it, probably enough for one guitar but that's it, it's convenient that you can order this with your guitar and it'll arrive in the same box but you'll be paying a premium for that convenience.
If you're ordering a guitar from Thomann and that's the only guitar you want to shield this is a nice easy option but for my purposes there just wasn't enough.
1
0
Report
A
Not enough for the price
This only was able to cover 75% of my Squier Bullet Mustang "swimming pool" cavity. I would suggest buying two unless you have a particularly small electronics cavity like in a backrouted guitar.
6
0
Report
j
Expensive
Works well and easy to use......just very little amount for the price. I will not buy this again and will use other alternatives.
0
0
Report
S
You might need two packs.
This Copper tape with conductive adhesive is easy to use and the adhesive works well, nice and tacky, smooths out well too.
The only problem is the smaller than adequate amount you get for the money.
If you're doing a strat style guitar you will need two packs which makes it more expensive than many alternatives.
The only problem is the smaller than adequate amount you get for the money.
If you're doing a strat style guitar you will need two packs which makes it more expensive than many alternatives.
0
0
Report
D
OK, but too short for an entire guitar
I used this on a Tele. The quality is OK, but not enough tape to do an entire guitar.
1
0
Report
D
Good but not enough
I already read some reviews before buying where some people stated that one tape strip is not enough. I'll have to give this a +1. So beware, I needed nearly 2 strips for a Stratocaster shielding, and this is EXCLUDING the back of the pickguard which I decided to shield with a one piece aluminum foil. Other than that the tape is good, the adhesive is great and is conductive, which is a must because your little pieces will touch one another.
0
0
Report
HB
Copper shielding
It looks much bigger on pictures so if you want to shield strat you should get at least 2. Works great
0
0
Report
S
Buy a bigger/wider roll
Bought this never used it its to narrow to use for proper sheilding of a guitar
0
0
Report
P
not enough
it's really good, but you'll need 3 of them for a Strat
0
0
Report