Doepfer A-100Ad5

28

5V Low-cost adapter

  • Plug adapter for +5 V / 100 mA
  • Can be used in place of a 5 V power supply
  • For Doepfer modules requiring +5 V: e.g. the A-113,190 or 191
  • Can be plugged into a free socket on the bus board
  • The current is taken from the 12 V supply
Available since January 2004
Item number 166503
Sales Unit 1 piece(s)
Description Electronic Component
$13.60
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

28 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

15 Reviews

S
May the force be with you... exactly 5 volts.
Stephen662 15.07.2013
Needed this to supply 5 volts to some of the modules in my Doepfer case. Yes, some modules (usually logic modules) need 5v to work, and this is what you need.

Simply plugs into the rail that you need to supply the 5v on - if you have 5v modules all over your rack you will need to instal one on each rail as required. Job done. Works a treat.
3
0
Report

Report

A
You might not think you need this but you probably will
Anonymous 20.01.2016
This little adaptor will allow you to run anything which requires a +5v power supply on one power rail of your modular case. I bought it because it was required for an oscillator which I purchased, but it can have many applications. My next use for it will be to power LED lights to illuminate my modular in gig situations. You simply connect the adaptor to a spare connector on the rail which you will need it, and then you have +5v power available for all the other connectors on that rail. My one reservation is that this could have been a little bit cheaper for what it does, or alternatively Doepfer could just build this provision into their modular cases as standard. After all a P9 case, for example, is not cheap and when you have spent that amount of money you kind of resent having to buy this.
0
0
Report

Report

A
Andrew463 06.12.2014
Tough one to rate as it's just a plug... but if you have products from Mutable Instruments and others that require 5-Volt power it's a necessity for a Doepfer rack. It couldn't be any simpler to use, just plug it in and away you go.

Again, good value too.
1
0
Report

Report

HT
Get it for those hungry modules.
Harry Turner 02.11.2019
The Sub Harmonic Generator requires this.
quality
0
0
Report

Report