T
Better than expected
I use QLC plus for lighting control on a basic desktop machine with minimal Ubuntu installed. I had problems with flickering lights with Enttec open interfaces and decided to upgrade to this. It solved my problems, and contrary to the instructions no additional drivers had to be installed in the Ubuntu machine. I also ran it without problem on a Mac with an M1 processor.
The only issues I had were with the manufacturers instructions. To check or update the firmware and, if necessary reset it, you need additional software, which it turns out has to be EMU light control software. There is a free version of this, but finding it is not straightforward. The manufacturer does have good support, though, and did provide a link to me. You may wish to get over this hurdle before it arrives.
The only issues I had were with the manufacturers instructions. To check or update the firmware and, if necessary reset it, you need additional software, which it turns out has to be EMU light control software. There is a free version of this, but finding it is not straightforward. The manufacturer does have good support, though, and did provide a link to me. You may wish to get over this hurdle before it arrives.
0
0
Report
E
Good interface but not as good as it used to be
Be careful: the photos shown are not correct anymore
Pros:
* Reliable
* Works with a lot of software
Cons:
* Very expensive price
* Used to be in a metal enclosure, which justified a part of the price, but on the latest versions, it's now cheap plastic!
I would still recommend it for its functionalities but Entecc is clearly trying to cheap out on their product, using their settled good reputation to sell those...
Pros:
* Reliable
* Works with a lot of software
Cons:
* Very expensive price
* Used to be in a metal enclosure, which justified a part of the price, but on the latest versions, it's now cheap plastic!
I would still recommend it for its functionalities but Entecc is clearly trying to cheap out on their product, using their settled good reputation to sell those...
0
0
Report
N
Works well
Used this for lighting for our church. Used with Lightkey for Mac software. Had an issue with serial port and usb settings not recognising the entice device and solved by the following post:
, very good device where sometimes the show freezes while the device hangs on a MacBook Air
, very good device where sometimes the show freezes while the device hangs on a MacBook Air
0
0
Report
N
Power-full device
Works super well with Touchdesigner !
NO LAG !!!
Since a bit, the box is made out of plastic, before this product use to be made out of a strong metallic case, this is a bit disappointing since the plastic doesn't sound very solid.
NO LAG !!!
Since a bit, the box is made out of plastic, before this product use to be made out of a strong metallic case, this is a bit disappointing since the plastic doesn't sound very solid.
0
0
Report
D
Works well
I bought this unit to replace another product that was causing occasional buffering issues on a Mac computer. No such issues here. Works exactly as needed. I would love if it would also do a merge function (i.e. DMX in is merged with DMX out) but otherwise it is great.
0
0
Report
