Thread Adapter

  • 1/2" and 3/8" inner threads
  • 5/8" 27 pitch outer threads
  • Galvanised
  • Weight: 10g

These are other customers' choices:

Customers who looked at this item have bought these:

K&M 215
41% bought this exact product
K&M 215
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$1.98 Add to Basket
K&M 217
14% bought K&M 217 $1.32
K&M 216 Thread Adapter
9% bought K&M 216 Thread Adapter $2.54
Millenium Thread Adapter 3
8% bought Millenium Thread Adapter 3 $0.85
K&M 21920
4% bought K&M 21920 $4.70
Our most popular Stand Accessories
940 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • quality
Total
quality
Essential Adapter
Dave R., 08.12.2014
You just never know when you are going to need this essential little bit of gig gear. I've been caught out too many times in the past. When you switch between different microphones you often need this little fella to adapt between the different mic stand thread sizes.
For example, I usually sing through a Sure SM58 (industry standard) microphone which fits into a mic holder. However, I sometimes use a Skull Head (Elvis mic) when doing a gig with a 50's rock'n'roll band. The Skull Head mic doesn't use a mic holder. It screws directly onto the mic stand. If I don't have the adapter, I'm screwed (forgive the pun).
I always have a spare adapter in my gig bag these days - I won't be caught out again.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Does what it says on the tin
Wakado, 22.05.2020
Invaluable adaptor for mic stands, often supplied FOC with mics from Thmann
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
VoxBoxBand, 20.05.2020
a good and quality product
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Really useful
Will Hz, 09.11.2019
pop a few of these in your gig bag - you never know when you might need them - and when you do they may well save the day or night!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
K&M 215
(943)
K&M 215

Thread Adapter 1/2" and 3/8" inner threads, 5/8" 27 pitch outer threads, Galvanised, Weight: 10g

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 5/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 1/2" & 3/8" female
Manfrotto 015 Adapter 1/4" - 3/8"
(268)
Manfrotto 015 Adapter 1/4" - 3/8"

Screw Adapter To convert 1/4 outer thread to 3/8 inch inner thread

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 3/8" female
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 1/4" male
K&M 217
(892)
K&M 217

Thread Adapter 3/8" inner threads, 5/8" 27 pitch outer threads

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 5/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 3/8" female
K&M 21920
(267)
K&M 21920

Thread Adapter Inner threads: 3/8", Outer threads: 1/4" 20 pitch

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 3/8" female
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 1/4" male
K&M 216 Thread Adapter
(464)
K&M 216 Thread Adapter

Thread Adapter 5/8 " 27 Gg. Internal thread, 3/8 " External thread, Nickel, Weight: 22 g

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 5/8" female
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 3/8" male
Manfrotto 088 Adapter 3/8" - 1/4"
(130)
Manfrotto 088 Adapter 3/8" - 1/4"

Screw Adapter To convert 3/8 outer thread to 1/4 inch inner thread

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 3/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 1/4" female
Manfrotto 147 Adapter Spigot 3/8" - 1/4"
(29)
Manfrotto 147 Adapter Spigot 3/8" - 1/4"

Short Adapter Spigot 3/8" +1/4"

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 3/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 1/4" male
Manfrotto 148KN Adapter Set 3/8" to 1/4"
(19)
Manfrotto 148KN Adapter Set 3/8" to 1/4"

Adapter Set Threaded set from 3/8" to 1/4", Contents: 5 pieces

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 3/8" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 1/4" female
Adam Hall SLS 36 TV 28 Adapter 28mm
(36)
Adam Hall SLS 36 TV 28 Adapter 28mm

Adapter 28 mm (TV Spigot) to 35 mm The adapter is ideally suited to position speakers, for example, on elevating tripods with TV2, Material: Steel, Finish: galvanized, uitable for tube diameter: 35...

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: 35 mm bolt
  • Thread bigger side: not existing
  • Diameter of bolt/flange socket smaller side: 28 mm bolt
  • Thread smaller side: not existing
K&M 21900
(26)
K&M 21900

Thread Adapter Inside 3/8" on outside 1/2" diameter, Extra thin special version, For microphone swivel arm 21231 when used on 3/8" stands, Galvanized surface

  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: not existing
  • Thread bigger side: 1/2" male
  • Diameter of bolt/flange socket smaller side: not existing
  • Thread smaller side: 3/8" female
VMB TV-06 Spigot Adapter 35mm-29mm
(7)
VMB TV-06 Spigot Adapter 35mm-29mm

TV spigot Adapter Sleeve for holding 28 mm TV spigots, Suitable for VMB TE 034, 064, 071, 076, Ø (outside) 35 mm> Ø inside 29.0 mm

  • Mounting type: Accessories
  • Type: Adapter
  • Diameter of bolt/flange socket bigger side: 36 mm bolt
  • Colour: Silver
  • Thread bigger side: not existing
  • Diameter of bolt/flange socket smaller side: 28 mm flange socket
  • Thread smaller side: not existing
$1.98 €1.76
Plus $50.35 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(1)
Recently Viewed
Toontrack EZbass

Toontrack EZbass (ESD); virtual bass guitar; extensively produced bass software / plugin with 2 basses, based on samples of an Alembic 5-String bass and a 5-string Fender Jazz Bass; sub bass with two synthesized sine tones add both fullness and...

Recently Viewed
Adam T8V

Adam T8V; Active Nearfield Monitor; 8" Woofer; 1.9" U-ART Accelerated Ribbon Tweeter; 2x Class-D Amp: 70 Watts RMS Woofer, 20 Watts RMS Tweeter; Frequency Range: 33 Hz - 25 kHz; Crossover Frequency: 2.6 kHz; max. SPL: 118 dB (1m /...

(5)
Recently Viewed
Behringer CAT

Analogue Synthesiser VCO 1 with 4 miscible waveforms (sawtooth, triangle, pulse and suboctave), Pulse width modulation and two adjustable modulation sources, VCO 2 with 3 mixable waveforms (sawtooth triangle and suboctave) and two adjustable modulation sources, Low pass filter...

(4)
Recently Viewed
iZotope Music Maker's Bundle

iZotope Music Maker's Bundle (ESD); Plugin-Bundle; contains eight essential tools for audio editing and creative music production; consists of BreakTweaker Exp, Stutter Edit, Trash 2, Iris 2, Elements Suite (Nectar Elements, Neutron Elements, Ozone Elements und RX Elements); supported formats...

Recently Viewed
K&M 80310

K&M 80310 disinfectant stand with bracket; bottle holder dimensions: 102 x 91 mm; base diameter: 275 mm; drip cup can be removed for cleaning; with bracket to fix the disinfectant bottle ; round base; weight: 3,6 kg; colour: pure white;...

Recently Viewed
Rode Wireless GO White

Rode Wireless GO White; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20...

Recently Viewed
Rockstand RS 20866 6 E-Guitar Stand

Multi-Guitar Stand For up to 6 electric guitars and / or electric basses, The electric guitar holder can be turned to hold V-style guitars, Can be folded up and folded compactly, Dimensions when set-up (L x W x H):...

Recently Viewed
tc electronic Hall Of Fame 2 Mini Reverb

Effect pedal for electric and acoustic guitar Reverb, TC MASH technology transforms the foot switch into a pressure-sensitive expression controller, New Schimmer-Reverb Algorithm, The Analog-Dry Through maintains the integrity of the dry signal when the reverb is switched on,...

(1)
Recently Viewed
Mackie CR3-X

Multimedia Monitors Equipped with a 3" woofer and a 0.75" tweeter, Power: 50 W, Frequency range: 80 - 20,000 Hz (-3 dB), Housing: MDF, Power supply: 100 - 240 V AC, 50/60 Hz, Dimensions (W x H x D):...

(2)
Recently Viewed
Behringer Eurorack Go

Behringer Eurorack Go; Eurorack case; two rows with 140 HP each, build-in busboard with 32 headers for Eurorack modules;, vertical positioning possible via integrated tilt stand; 96 sliding nuts (M3) pre-installed; maximum module depth: 40mm (lower row), 62mm (upper row);...

Recently Viewed
FabFilter Saturn 2

FabFilter Saturn 2 (ESD); multiband distortion plugin; variable distortion and saturation effect with up to 6 frequency bands, with optional linear phase processing; 28 different distortion styles, from subtle analog saturation to brute digital; adjustable slope for the crossovers, offering...

Recently Viewed
Rockstand RS 20865 3 E-Guitar Stand

Multi-Guitar Stand For up to 3 electric guitars and / or electric basses, The electric guitar holder can be turned to hold V-style guitars, Can be folded up and folded compactly, Dimensions when set-up (L x W x H):...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.