Mackie Thump Sub GO
Dual 8" Active Subwoofer with Battery Operation
- 2 custom 8" woofers
- Battery life: Up to 6 hours (12 hours with two batteries)
- Battery can be replaced during operation (Hot Swap)
- 400 Watt Class D power amplifier
- Frequency response: 32 – 152 Hz
- Max sound pressure: 123 dB
- Inputs: 2x combo XLR/6.35 mm jack
- Bluetooth 5.4
- Outputs: 2 x XLR
- Stereo/mono output and full range/high-pass switchable
- Master volume control with overload LED
- Phase reverse switch
- Power status LED (front, can be switched off)
- Bluetooth status LED
- Battery status LEDs for each battery
- Circuitry protection: Limiter (peak, RMS), overheating (power supply, output stage)
- M20 thread for spacer rod
- Robust carry handle
- Power supply: Mains cable with IEC or rechargeable battery
- 2 battery compartments
- Dimensions (W x D x H): 556 x 249 x 531 mm
- Weight: 18.9 kg
- Includes 1x GB-200 replacement battery
- Suitable cover: Art.625066 (not included)
- Suitable replacement battery pack: Art.625067 (not included)
-
Available since November 2025
-
Item number 625065
-
Sales Unit 1 piece(s)
-
Power (Manufacturers Specs) 400 W
-
Number of Bass Woofers 2
-
Bass Woofer in Inch 8"
-
Colour Black
-
Width 533 mm
-
Height 559 mm
-
Depth 249 mm
-
Weight 18,9 kg
-
Wheels No
-
Stand Flange M20
-
Multi Channel Power Amp No
-
Remote Control No
-
Flyable No
-
Sound Pressure in dB 123 dB
-
Number of HT-Speaker 0
-
Numbers of HT Speaker 0
-
HT Speaker in Inch No
-
Construction Type Standard
-
Number of Midrange Speaker 0
-
Midrange Speaker in Inch No
-
Number of Bass Speaker 2
-
Bass Speaker in Inch 8"
-
Number of Ways 1-Way
-
Housing Material Plastic
-
Construction Standard
-
Line Out XLR
-
Input Connector Combo
-
Output Connector XLR
-
Battery Yes
-
Batterie Info up to 12 Hours
-
Batterie Information up to 12 Hours
-
X-Over Connector No
-
High Cut Non Adjustable
-
Using for PA
-
Frequency Range (-10dB) from 32 Hz
-
Analog Inputs 2
-
Frequency Range (-10dB) to 152 Hz
-
Microphon Input 0
-
Frequency Range (-3dB) from 39 Hz
-
Frequency Range (-3dB) to 100 Hz
-
Line Input Yes
-
Microphone Input 0
-
Media Player No
-
Voice Assistant No
-
Wireless Mic Handheld / Handheld No
-
Effect No
-
Wireless Mic Handhleld / Headset No
-
Low Cut No
-
Voice Assistent No
-
No cables, no wires – just bass
The Mackie Thump Sub GO is a compact, battery-powered subwoofer designed to extend low-frequency performance in fully portable PA systems. Built around dual 8" woofers and a 400W Class D amplifier, it delivers a frequency response down to 32Hz with a maximum SPL of 123dB, providing solid low-end reinforcement for small to medium-sized setups. Its dual battery system offers up to 6 hours of operation per battery, with the option to run for up to 12 hours using two batteries, while also supporting standard IEC mains power when available. Beyond its standalone performance, the Thump Sub GO is designed as part of Mackie's portable GO ecosystem, forming complete battery-powered PA systems when paired with compatible tops and mixers capable of projecting clear, high-quality audio to an audience of up to 100 people, with Bluetooth connectivity supporting wireless audio distribution across the entire system.
)
High quality low-end
The Thump Sub GO is designed for straightforward integration into portable PA systems, acting as both a subwoofer and a central signal hub. Two XLR/TRS combo inputs support microphones, mixers, and line-level sources, while Bluetooth connectivity allows wireless audio to be streamed directly into the system and passed on to connected speakers. The sub can operate in mono or stereo configurations, with XLR outputs for linking full-range speakers, while a selectable high-pass mode at 150Hz routes higher frequencies to the outputs for clean separation between the subwoofer and connected tops. A variable level control and overload indicator provide clear feedback during operation, while a phase inversion switch helps align the sub with external speakers. The front-panel LED can also be disabled, and dedicated indicators display battery status for clear status indication during operation.
)
Lightweight for long nights
The Thump Sub GO is particularly suited to mobile performers, DJs, and event setups where portability and independence from mains power are essential. Its battery-powered design makes it a practical option for outdoor environments such as beach events, street performances, and temporary installations, as well as locations where access to reliable power is limited. After 6 hours of operation, a second Mackie GB-200 battery (sold separately) inserted into the additional battery slot can extend runtime to up to 12 hours of continuous use, enough to host some epic events. With a compact footprint and a weight of just under 19kg, the unit remains easy to transport via its integrated carry handle, while its design supports both horizontal and upright placement depending on the available space.
){kind=logo}
About Mackie
In 1988 Greg Mackie, already a successful co-founder of a pro audio company, founded Mackie Designs Inc. with the goal of producing affordable, high-quality mixers. The company's first official product, the LM-1602 line mixer, was initially produced within the four walls of his home. As sales figures were encouraging, its successor model CR-1604 soon followed - and in 1991 the company finally moved into its first proper production facility. The combination of reliable quality and low prices quickly brought the company enormous success, so that by 1995 Mackie had already sold 100,000 products. In 2003, the company was renamed LOUD Audio, LLC so that there is no longer any confusion between the Mackie brand and its former parent company of the same name.
For full-range sound absolutely anywhere
The Thump Sub GO, part of Mackie's larger GO series, can be paired with Thump GO loudspeakers to create a fully battery-powered PA system with extended low-frequency response. The tops operate on their own internal batteries and are optimised to work seamlessly with the sub, while the addition of the ProFX10 GO mixer introduces wireless signal routing via bidirectional Bluetooth. This allows audio to be streamed across the entire system without physical connections, supporting compact, cable-free setups for performances, events, and presentations in a wide range of environments. When used horizontally, the integrated M20 threaded pole mount supports standard speaker poles for mounting a top speaker, forming a compact and practical system layout. The second battery slot supports an additional Mackie GB-200 battery, allowing up to 12 hours of continuous operation across extended sessions in both indoor and outdoor settings.
This is what customers who viewed this product bought
Accessories & matching items
Compare options
-
Mackie Active Subwoofers at a glance
-
Display Active Subwoofers from $ 500 - $ 1000
-
Go to product group Active Subwoofers
-
Go to product group Battery Powered Speaker Systems
-
Go to product group Bluetooth Speakers
-
Go to product group PA Speakers
-
Go to product group PA Equipment
-
Show manufacturer details for Mackie
-
Mackie PA Equipment at a glance