RME Fireface UCX II + SoundID
Bundle offer comprising
RME Fireface UCX II
USB 2.0 Audio Interface
- 24 Bit / 192 kHz AD/DA converter
- 20 Input and output channels
- SteadyClock FS
- Stand-alone functionality
- DURec feature: built-in digital recorder for all inputs and outputs directly to USB storage devices via the rear USB port (enables recording to USB sticks or hard drives with up to 2 TB capacity)
- TotalMix mixing / routing software
- DigiCheck software
- Class Compliant
- Compatible with optional ARC USB remote control (not included)
- DC-coupled outputs - CV/Gate Voltage Control
- +48 V phantom power
- Colour display
- Housingt type: 9.5" 1 U
- Dimensions (W x H x D): 215 x 44 x 130 mm
- Weight: 910 g
- Incl. external power supply 100V - 240V AC, 12V 2A DC
Connections:
- 2 Mic/line combo inputs: XLR / 6.3 mm jack
- 2 Instrument/line inputs: 6.3 mm jack
- 4 Line inputs: 6.3 mm jack
- 6 Line outputs: 6.3 mm jack
- Stereo headphone output: 6.3 mm jack
- ADAT input and output
- Word Clock input and output
- AES/EBU and S/PDIF coax
- MIDI input and output
- DUrec USB
Sonarworks SoundID Ref Spk & HP w Mic BDL
Sonarworks SoundID Reference for Speakers & Headphones with Measurement Microphone (Box)
- Bundle of measurement microphone and software for speaker and headphone calibration
- Frequency response correction for studio monitors and headphones for the most linear playback possible
- Enables better assessment of recordings and mixes
- Room analysis and automatic room size calculation via numerous measuring points
- Audio Calibration Engine for the most accurate adjustment
- Any number of speaker profiles can be saved
- Comes with calibration curves for over 280 different headphone models
- Target curves can be customized in real time
- Translation Check simulates over 20 different devices and device types for the accurate implementation of a mixture
- Three selectable filter modes: Zero Latency
- Mixed and Linear Phase to optimize filter quality and latency for different listening situations
- Additional settings for mono
- Dry/Wet and Safe Headroom
- Only available in the app: MIDI mapping for various parameters and user presets for predefined output configurations
- Measuring microphone with pre-polarized electret condenser capsule
- Frequency range: 20 - 20000 Hz with measurement protocol
- Polar pattern: Omnidirectional
- Sensitivity: 14mV / Pa
- Inherent noise: 24 dB
- Signal-to-noise ratio: 70 dB
- Dynamic range: 106dB
- Maximum sound pressure level: 132 dB SPL
- requires 48V phantom power
- Connection: XLR 3-pin
- Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software
- Calibration file for 0° on-axis measurements in TXT format
-
Available since November 2026
-
Item number 658902
-
Sales Unit 1 piece(s)
-
Recording / Playback Channels 20x20
-
Number of Mic Inputs 2
-
Number of Line Inputs 8
-
Instrument Inputs 2
-
Number of Line Outs 6
-
Headphone Outs 1
-
Phantom Power Yes
-
Number of S/PDIF Connectors 1
-
Number of ADAT Connectors 1
-
Numer of AES/EBU Connectors 1
-
Number of MADI Connectors 0
-
Ethernet 0
-
Other Connectors DUrec USB
-
MIDI interface Yes
-
Word Clock 1xIn, 1xOut
-
Max. Sampling Rate in kHz 192 kHz
-
Max. Resolution Rate in Bits 24 bit
-
USB Bus-Powered No
-
Incl. power supply Yes
-
USB Version 2.0
-
Width 215 mm
-
Depth 130 mm
-
Height 44 mm
-
Connection Format USB port Type B
-
Included in delivery Power Cable, USB-A to USB-B Cable, USB-B to USB-C Cable, TOSlink Cable, S/PDIF+AES Adaptor Cable
-
Zero latency monitoring Yes
-
-
RME USB Audio Interfaces at a glance
-
Display USB Audio Interfaces from $ 1250 - $ 1750
-
Go to product group USB Audio Interfaces
-
Go to product group Audio Interfaces
-
Go to product group Studio and Recording Equipment
-
Show manufacturer details for RME
-
RME Studio and Recording Equipment at a glance