B
Generally very good with 2 drawbacks
This pedalboard is very good with innovative design compared to pedaltrains or palmer (which I also have).
However the biggest problem I faced was to install the MOD1 because there are 2 vertical beams underneath which make it impossible to screw the MOD without removing these beams. And if you remove these beams is very difficult to screw them back again to the board without proper tools (in my opinion the tools provided are a joke, as you need "real" tools and a LOT of patience to install the MOD and the beams back to their place).
Another problem was that the screws quality (for the MOD) is rather cheap so be careful not to overtighten - one of them simply broke and probably this cheap quality is the reason they supply you with extra screws and nuts.
Other than the above 2 problems it is very good and light and I like a lot the fact you can hide the cables underneath more easily than other pedalboards (you can wrap them around the two beams or insert the cables inside them) and keep everything tidy and out of sight.
However the biggest problem I faced was to install the MOD1 because there are 2 vertical beams underneath which make it impossible to screw the MOD without removing these beams. And if you remove these beams is very difficult to screw them back again to the board without proper tools (in my opinion the tools provided are a joke, as you need "real" tools and a LOT of patience to install the MOD and the beams back to their place).
Another problem was that the screws quality (for the MOD) is rather cheap so be careful not to overtighten - one of them simply broke and probably this cheap quality is the reason they supply you with extra screws and nuts.
Other than the above 2 problems it is very good and light and I like a lot the fact you can hide the cables underneath more easily than other pedalboards (you can wrap them around the two beams or insert the cables inside them) and keep everything tidy and out of sight.
1
1
Report
g
Nice product but a bit weighty
The pedalboard is really well done and robust. Just a bit weighty. I should have consider a flight case instead of the soft bag that partially protect the pedals. Accessory are a bit expensive (ex patchbay). Overall I?? quite happy with it.
3
0
Report
q
Pleased
+ MODs keep cables tidy
- Installation of a MOD leaves little room for a power brick in the middle bay. There should be extra mounting holes for The Tray in the outer bays.
- Installation of a MOD leaves little room for a power brick in the middle bay. There should be extra mounting holes for The Tray in the outer bays.
3
0
Report
HB
It's what you expect from the pedalboard.
Quality and to a certain point well thought out product. It does look sturdy and reliable. Bag is more than good enough. You will however have problems mounting that Rockboard MOD 1 V2 TRS & XLR Patchbay because the screw holes are just under those reinforcement vertical bars and you'll need to remove them. Also the space beneath for for your power is then limited and I struggled to put Strymon Zuma but at the end managed with the help of rockboard tray. Good thing about this pedalboard is that you have so much additional gimmicks you can buy for it like cable holders that just fit perfectly. Best one I've owned but as I said before. Prepare your screwdrivers and wrenches.
0
0
Report
I
Good board, trash gig bag.
I like the everything about the board but get it with the flight case instead because this gig bag started falling apart after just 3 gigs.
0
0
Report
