500 Series Components

SSL 500 B-Series Dynamic Module

Based on the SSL bus compressor
Compressor, limiter, de-esser, expander and gate functions
Ratio, threshold and release controls

Main frequency bands: sub or 10 Hz, 40 Hz, 160 Hz, 650 ...
Air band shelf equaliser settings: off, 2.5, 5, 10, 15, 20 and ...
Bypass switch

Cranborne Audio Carnaby 500

Analogue EQ circuit that uses harmonic saturation to boost and cut frequencies
Parametric LO and HI shelving bands with ±10 dB cut/boost
Parametric MID band with ±10 dB cut/boost and fixed Q factor

Black Lion Audio Bluey-500

Black Lion Audio Bluey-500; mono compressor; modified "Blue Stripe" compressor based on a unit by Chris Lord-Alge in 500 format; discrete circuit with...

Midas Legend L10

Low noise power supply with 3.2 A @ ±16 V and 300 mA @ +48 V
Width: 448.31 mm
Height (without feet): 132.40 mm

Rupert Neve Designs R6

8 Channels I/O with XLR, jack and SubD/DB25 connectors
LED Metering for electricity consumption monitoring
48V Phantom power available per channel

SSL 500-Series Bus Compressor MkII

With highpass filter in sidechain
500 series - stereo dynamic module
Bus compressor

SSL 500-Series 611 EQ

500 series
SSL 4000 E Series circuit
"Black-242" and "Brown-02" twin EQ design

Rupert Neve Designs 542

API 500 Format
Tape saturation emulator
Trim control (+/-12 dB PreTape Level Control)

Cranborne Audio 500ADAT

With integrated 8 In / 8 Out ADAT expander
8 I/O channels with XLR
8 Channel discrete analogue summing unit

Chandler Limited TG2 500 Preamp

+60 dB gain
Switchable +48V phantom power
Phase switchable

Rupert Neve Designs R10

XLR and 6.3 mm jack input and output per channel
LED display for power consumption
VCA buses in channels 1-2, 3-4, 5-6, 7-8, 9-10 can be activated in pairs via ink jumpers

Rupert Neve Designs 511

1 Channel Mic preaamp with 500 Module formfactor
+48V Phantom power can switched On and Off
8 Segment LED Level-Meter

API Audio 512v Preamp

Microphone preamp with 65 dB gain
Line and instrument pre-amplification with 45 dB gain
Button for 3: 1 output transformer

Rupert Neve Designs 543

Preamplification: stepless from 6 dB to +20 dB
Threshold range: stepless from 36 dB to + 22 dB
Ratio range: stepless from 1.1: 1 to limit (40: 1)

IGS Audio Rubber Bands 500 Mastering EQ

500 Series module format
Q factor: -0.5 to 4
Boost/cut range: +/- 15 dB

API 500 format
Amplification range for all bands between +/- 5 dB and +/- 15 dB switchable
Treble: Frequency adjustable from 2 - 20 kHz, characteristic switchable Shelf / Bell

API Audio 500VPR

10 Module slots for standard module 500 from different vendors
Inputs and outputs via XLR
Incl. external power supply L200PS

Cranborne Audio Camden 500

Linear, transparent microphone preamplifier
2 Discrete analogue saturation circuits for sound colouring
THD+N: 0.0002 %.

Fredenstein Bento 8 Pro Pure Analog

With analogue power supply +/- 16 Volt / +48 Volt
500 mA per slot
Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel

Neve 88RLB Preampmodule 500er API

The 500 series API format
Based on the known 88RS module
Legendary Neve sound

Heritage Audio 73 Jr. II

80 dB Class A microphone preamplifier
Selectable input impedance
Ideal for ribbon microphones

Elysia xpressor neo 500

For recording, mixing and mastering
Smooth control behaviour due to RMS detector and soft knee curve
Parallel compression and side chain inputs and outputs

Elysia xfilter 500

100% Class-A topology
True stereo link
High and low shelf filter

SSL 500-Series 611 DYN

500 series
Compressor Limiter
SSL 4000 Series circuit

The shipping costs are calculated on the checkout page.
The prices shown exclude VAT