the t.bone MS 180

Mounting Popkiller

  • With elastic arm
  • Arm length: 20 cm
  • Edge-Ring: Ø 15.5 cm
  • Nylon-Cover: Ø 14 cm

Further Information

Component type Popkiller

These are other customers' choices:

Customers who looked at this item have bought these:

the t.bone MS 180
49% bought this exact product
the t.bone MS 180
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$14.95 Add to Basket
K&M 23956 Popkiller
19% bought K&M 23956 Popkiller $18.85
Fun Generation Pop1
7% bought Fun Generation Pop1 $7.10
the t.bone Windscreen WS60
4% bought the t.bone Windscreen WS60 $2.90
the t.bone MS 200
4% bought the t.bone MS 200 $16.99
Our most popular Windshields and Popfilters
5531 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.3 /5
  • quality
Total
quality
Great Pop Shield!
sabians, 26.11.2020
Bought this pop shield to do some home recording with my daughter. Used with a t.bone SC450.

This pop shield does the job. Like the flexible arm which helps to get a good position close to the microphone.

Not had any dislikes while using, just the initial setup of getting the correct position, but once setup you don't have to make any adjustments.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Amazing product
Soma328, 28.03.2018
It`s really cheap and does what it`s for perfectly... It`s easy to mount on any mic stand. It helps in eliminating the harsh pushes of air which create a 'pop' sound in the audio recording, so you get a better, cleaner sounding audio without 'popping' B, P and T sounds. The filter`s is made out of a double layered nylon mesh which holds back the air. The flexible steel arm holds the filter perfectly in front of the microphone capsule. It`s necessary for small and large diaphragm condenser microphones, it`s not needed for dynamic mics. I have never used my microphone without it, because it even protects the capsule from the accidental water drops coming from my mouth. My opinion is that it makes the microphone setup look much more professional on live stream or in videos.
I don`t really like the elongated steel piece which connects the mounting knob to the end of the flexible arm, I think it`s a little bit goofy, but I can live with it, because of the low price.
I think that there`s no point in buying anything else because this is the cheapest pop filter on the site and it does it`s job perfectly.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Does its work great
Sheen , 04.05.2019
I got this mounting popkiller as an additional item of a bundle and great thing I did - its really great. It obviously does what it is intended to do - gets rid of the unwanted air pushes that create a "pop" sound (therefore, the name), but quality is also an additional plus to it.

The connecting arm (tube that connects the mount to the popkiller) feels great and is flexible and firm - no matter how you twist it, it will stay firm and steady in any position. I think the quality shines even brighter in regards to the popkiller nylon-cover. I have tossed in my bag when traveling around with the microphone and in has been ripped or damaged in any way - it may seem fragile, but I have to say, It is surprisingly durable. The price, which isn't a lot for these popkillers, definitely gives more what you think you might get.

If you have a microphone at home or at studio that you want to equip with a great, low-price popkiller, I highly recommend getting this one. It does its job perfectly, is easy to use and mount, can be twisted and turned for your needs and has great durability.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Extremely fragile
07.03.2017
I got this "popkiller" as part of a package (together with the millenium ms-2003 microphone stand).

It was quite hard to figure out how to fix and tighten the popkiller to the stand. After tightening the screw multiple times to make the whole thing as stable as possible, the screw ended up breaking (!!! yes, it was apparently made of plastic !!!) after less than a month.

I can't say much about the "pros" of the product, as I didn't get to use it a lot ...

I'm not a professional so I don't "need" that popkiller but still, it gave me a poor impression of this product.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$14.95 €12.50
The shipping costs are calculated on the checkout page.

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Online Guides
Microphone accessories
Microphone accessories
The right accessories bring out the best in your microphones. Find out what’s available and what you can do with it!
 
 
 
 
 
test results:
* The prices shown exclude VAT. plus Shipping costs. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. Offers are subject to avaialability. We do not accept any liability for printing errors and omissions. All invoices are issued in Euro only.
(4)
Recently Viewed
Thomann DP-28 Plus

Digital Piano 88 Weighted keys with hammer action, 25 Sounds, Metronome, 50 Rhythms, 192-Note polyphony, Modes: Layer, Split, Duo Mode, Twinova, Reverb and Chorus, Music library with 100 preset songs, Transpose function, Bluetooth Midi for Pianotool App (iOS and...

(1)
Recently Viewed
Blackmagic Design ATEM Streaming Bridge

Blackmagic Design ATEM Streaming Bridge; Video converter that can receive an H.264 stream from any ATEM Mini Pro and convert it back to SDI and HDMI video; this allows video to be distributed to remote locations on a local Ethernet...

Recently Viewed
Stairville Green Screen Roll-Up 1.5x2m

Stairville Green Screen Roll-Up 1.5x2m; Mobile chromakey background; Easy transport and safe storage thanks to the roll-up system in the sturdy aluminium case; Quick assembly and disassembly thanks to two hydraulic supports; Sturdy and durable scissor system; Two folding feet...

Recently Viewed
Epiphone ES-335 Figured Blueberry Burst

Epiphone ES-335 Figured Blueberry Burst; e-guitar, "Inspired by Gibson"; semi-hollow; top layered maple with figured maple veneer; back and sides layered maple, back figured maple veneer; binding cream; mahogany neck, rounded C; fretboard indian laurel; nut width 43mm (1,693"); scale...

Recently Viewed
Electro Harmonix Mainframe Bit Crusher

Effects Pedal for Electric Guitar & Bass Bit Crusher, Produces 80s-style lo-fi sounds reminiscent of early arcade games, home consoles and home computers, Reduces the sample rate from 48 kHz to 110 Hz, which leads to reduced audio quality...

Recently Viewed
Behringer Modamp Module 1005

Behringer Modamp Module 1005; Eurorack module; Ringmodulator and VCA; 2 ignal inputs with level controls; MOD and UNMOD modes for selecting Ringmodulator or Amplifier operation; 2 adjustable CV outputs for controlling external Oscillators; Gate inputs to switch modulation modes; build-in...

Recently Viewed
Varytec VR-260 Video Ring Light LED Bi

Varytec VR-260 Video Ring Light LED BiLight with integrated rechargeable battery; perfect video and photo ring light with adjustable color temperature and countless mounting possibilities for tripods, mobile devices and cameras. Integrated rechargeable battery with USB power output to charge...

(4)
Recently Viewed
Nux MG-300

Multi-Effect Pedal for Electric Guitar Realistic feel and playability, Studio sound quality, Quick Tone editing software for selecting and optimising patches, loading 3rd party IRs to extend the sound possibilities, 56 Drum beats, 60 Second phrase loop with rhythm...

Recently Viewed
Epiphone ES-339 Vintage Sunburst

Epiphone ES-339 Vintage Sunburst; e-guitar, Inspired by Gibson" ES-339; semi-hollow; top layered maple; back and sides layered maple; binding cream; mahogany neck, rounded C; fretboard indian laurel; nut width 43mm (1,693"); scale 628mm (24,724"); 22 frets; nut graphtech nuBone; pickups...

(2)
Recently Viewed
NANO Modules ONA

NANO Modules ONA; Eurorack module; CEM3340-based analog VCO/LFO; octave switch (range: 8 octaves) and Fine-Tune control; selectable VCO- or LFO-Mode; switchable linear or exponential FM input; CV inputs for FM and Pulswidth, both with Attenuators; hard-sync input; waveform outputs: sine,...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.