Millenium MS 2003

Microphone Stand with Boom Arm

  • Cast base with foldable feet
  • Metal tommy screw on the boom joint
  • 3/8" Threads for microphone clamp
  • Includes 3/8" to 5/8" thread adapter
  • Height adjustable from 105 - 170 cm
  • Adjustable arm: 75 cm
  • Colour: Black

Further Information

Height in mm 1050 mm – 1700 mm
Boom Arm Length in mm 750 mm
Colour Black
Base Tripod

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium MS 2003
55% bought this exact product
Millenium MS 2003
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$16.90 Add to Basket
Millenium MS 2005
5% bought Millenium MS 2005 $12.90
K&M 210/9 Black
5% bought K&M 210/9 Black $45
Fun Generation Mic Stand
5% bought Fun Generation Mic Stand $9.90
K&M 27105
5% bought K&M 27105 $24.50
Our most popular Microphone Stands
7540 Customer Ratings
  • 5
  • 4
  • 3
  • 2
  • 1
4 /5
  • handling
  • stability
  • quality
Total
handling
stability
quality
It holds my mic up..side down. Which is actually good.
G-Evans, 30.04.2018
For the price i didn't expect much but having the smaller version as a bass drum mic stand i knew milennium stuff is usualy decent in spite of the low price.

The metal mechanism on the boom is definitely more durable then the even lower cost plastic series meilennium offer however in my specific use case i have experienced some stability issues.

i'm using it probably in the extremes of what it is made for. it's at it's full height with the boom arm out straight to the side. As i have the stand behind my drum throne, with the boom over my head. Also with a long gooseneck attached to bring the mic around and down in front of me.
At these angles and with the extra weight the boom droops a little over time, and i've noticed with the heavy gooseneck there is no way the mechanism to clamp the boom pole will ever tighten enough to hold this setup at any angle other than hanging straight down, but i need it to hang straight down so thats fine for me and it would certainly be expecting a lot from it to do anything but that.

I also need to be able to swing the whole thing off to the side when i don't need it and so the straight stand part of the mechanism deals with this fine, i was worrried it might come loose and drop down but so far it hasn't. I do however need to weigh the feet down with sandbags to be able to do all of this without it just tipping over, but i fully expected that.
For a practice room it is all that i need. if i was gigging with it i would probably buy a much heavier duty stand that i know is rock solid in every way.
For the price i can't complain about how well it holds up.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Millenium MS 2003 Mic Stand Review
Edwin', 22.09.2019
So, I've bought two of these stand for my studio. One of them I'm using for video recording with pretty light Behringer dynamic microphone and another one for Rode NT-1 combined with Micsreen.
Why am I giving "okay" instead of "good" or "very good". Well, this Mic stand with Boom arm actually works well as a stand for dynamic mic during a gig or video recording. But I'm not happy about it as a stand for my condenser mix, especially combined with Mic Screen. It will be more clear when you see the pros and cons.

Pros:
1. It's just a classy and good mic stand with pretty good Boom Arm for a dynamic microphone. It's already handled a few gigs and few hard rock videos, what I'm happy about.
2. Good price comparing with other microphone stands with boom arm.
3. The relation between price and quality - good.

Cons:
1. You got to be really careful while changing heights because it feels that it isn't hard to break it and it would not fix the heights anymore.
2. The purpose of this mic stand - for dynamic and light microphones, it's definitely not the best choice for condenser mics.
3. This microphone stand barely handles Mic screen (it's too big weight for this mic stand to handle but you can risk it).

In conclusion - it's okay. Price is really good it works fine at gigs, it handles dynamic microphones. I would recommend it for the beginner bands or artist who likes to practise a lot or have a lot of live plays. What I also would recommend is: you shouldn't save few euros for quality of your studio, so I would buy other Millenium stand for a condenser mic, which works perfect for condenser microphones and keep it stable. For 15 Euros, the price of this mic stand, you wouldn't expect to get the best quality possible, would you?

Have fun, you guys!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Great for just a microphone
Emile Michel Hobo, 26.10.2019
When you buy a microphone stand, the one thing you need to consider, like with anything else, is where you’re going to use it and how.

In a home-studio setting, you’re most probably going to add a reflection filter on the microphone stand itself to your microphone and that means it has to carry its weight. For on stage, with musicians that don’t apply thus much force that the fasteners get wrecked, this is a great budget microphone stand.

For singing without a reflection filter, this is a great microphone stand. For singing with a reflection filter, you’re going to find that you need tie-wraps or other kinds of outside help to keep the microphone stand in position.

Think about your setup.

Read about reflection filters first and if you can’t afford those, use the smallest possible room in your home you can find, possibly a bedroom will work. If you don’t use high pitched singing, but focus on for instance hiphop, a towel behind your microphone with the mic upside down will probably do fine also.

Think setup, use, and room you need to work in.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Very satisfied
Ronin 2K, 27.04.2021
I'm really satisfied with this purchase, I thought that it would be a waste because I heard that the microphone stand wouldn't be able to handle some microphones but it handles my Rode NT1 really good so I'm very satisfied, the stability can be sometimes a bit weird to set up but it's not like it's going to be unstable while recording. Most definitely a steal.
The only con can be setting it up qua stability but it's definitely gonna handle your microphones good! The rest is perfect. I love the height and how it's adjustable.
I definitely recommend it, what I don't recommend is to spend 10x more on a microphone stand, unless it's a boom arm.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$16.90
The shipping costs are calculated on the checkout page.
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Online Guides
Drum Mics
Drum Mics
Miking up and recording a drum kit is a fairly complicated procedure, and this can apply equally to choosing the right mics for the job.
Online Guides
Microphone accessories
Microphone accessories
The right accessories bring out the best in your microphones. Find out what’s available and what you can do with it!
 
 
 
 
 
test results:
* The prices shown exclude VAT and are valid as long as stocks last. Please click here for international shipping rates. Goods subject to custom declaration; customer fees to be paid on delivery if applicable. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in USD.
1
(1)
Recently Viewed
Line6 Relay G10TII Transmitter

Line6 Relay G10TII Transmiiter, 2,4 GHz plug and play Wireless transmitter for Relay G10 systems or Spider V series from Spider V 60, with internal receiver, audio frequency range 10 - 20.000 Hz, automic frequency setup, 118 dB SPL max.,…

2
(2)
Recently Viewed
Line6 Pod GO Wireless

Line6 Pod GO Wireless; Multi Effects Pedal for Electric Guitar; over 300 effects and models from Helix, M-Series and Legacy products, up to 6 simultaneous amp, cab, and effects models including a looper and a speaker cabinet simulation (Third-Party IR…

Recently Viewed
Harley Benton TableAmp V2 BlueTooth

Harley Benton TableAmp V2 BlueTooth, compact amplifier with great features for play-along and sing-along with streamed music using the integrated Bluetooth feature, ideal for acoustic guitar, ukulele, electric guitar, vocals and music, 30 watt RMS, 1x 5" bass woofer +…

1
(1)
Recently Viewed
Roli Lumi 1 Snapcase Black

Roli Lumi 1 Snapcase Black; sturdy and magnetic cover around the LUMI Keys for a slim and seamless fit; protects the LUMI Keys during transport and storage; easily folds into a stand for mobile devices; dimensions (W x D x…

1
(1)
Recently Viewed
Korg SQ-64

Polyphonic Step Sequencer with 4 Tracks 3 Melody tracks with 8-fold polyphony and 16 patterns of 64 steps each, Drum track with 16 monophonic sub-tracks, 64-Key matrix with illuminated buttons, OLED display, Editing modes per melody track: gate, pitch…

Recently Viewed
SSL 500-Series SiX Channel

Solid State Logic 500-Series SiX Channel; Channel Strip; with SuperAnalogue mic preamp and 5-way LED indicator; +48V phantom power; with phase and HPF switches; separate instrument/line input on front panel with Hi-Z switch (1MO); switchable 2-band EQ with bell and…

Recently Viewed
Arturia Pigments 3

Arturia Pigments 3 (ESD); virtual synthesizer; four sound engines with variable sound sources; Harmonic Engine with up to 512 partials; Wavetable Engine with a total of 164 wavetables; Utility Engine with sub-oscillator and two noise sample layers; Jup-8 V4 low-pass…

Recently Viewed
Lewitt LCT 140 Air Matched Pair

Lewitt LCT 140 Air Matched Pair - 2 matched small diaphragm condenser microphones, polar pattern: cardioid, frequency range: 20 Hz - 20 kHz, sensitivity: 14.6 mV/Pa, -36.7 dBV/P, max. SPL: 135 dB, low-cut: 80 Hz (12 dB/oct), pad switch: -12dB,…

Recently Viewed
Rode VideoMic Me-C

Rode VideoMic Me-C; condenser directional microphone; suitable for Android devices with USB-C connector; integrated USB type-C plug; 1/2" condenser capsule; polar pattern: cardioid; front pickup angle: 90°; sturdy aluminium housing with ceramic coating; built-in microphone preamplifier with DA converter (24Bit…

3
(3)
Recently Viewed
Alesis Nitro Expansion Pack

Expansion set for Alesis Nitro Mesh Kit Consist of 1x 10" One-Zone Pad and 1x 08" ON zones Tom Pad, Includes necessary rack clips, cymbal holder, L-rods and cables

Recently Viewed
IK Multimedia UNO Synth Pro Desktop

Analog synthesizer Paraphonic analog synthesizer with step sequencer, arpeggiator and effects section, Three wave morphing oscillators with PWM, sync, frequency and ring modulation, dual state variable filter with 24 modes, amplifier, Original OTA filter from the UNO Synth as…

Recently Viewed
Sennheiser MKE 400 MKII

Sennheiser MKE 400 MKII - condenser camera microphone, polar pattern: supercardioid, integrated windscreen, internal suspension, frequency response: 50 Hz - 20 kHz, switchable sensitivity: -23 / -42 / -63 dBV / Pa, max. SPL 132 dB SPL, 2 - 10V…

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.