Millenium MS 2003

8810 Customer ratings

4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

stability

quality

731 Reviews

Millenium MS 2003
$15.30
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1
BK
If you can afford it, buy a higher-end stand
Bobo K 15.07.2021
TLDR:

Pros:
- for its price, it gets the job done;
- again, for its price, you don't feel bad for banging it around;
- it's versatile in terms of positioning, unless you're looking for extreme angles;

Cons:
- only good when stationary. moving the boom around unlocks the screw that holds the lower and upper parts of the base rod.
- the horizontal adjustment of the boom is difficult - the screw there doesn't always hold the boom in its place. especially if you have a heavier mic;


Now, if you're looking at this product, you probably want to get the cheapest mic stand, whatever the reason. With this in mind, this is definitely a choice that can make for yourself and you'll be moderately happy.

Do have in mind though that if your setup is one where your microphone needs to move around and not be stationary, this happiness won't last much.

The screwing/locking mechanism that holds the lower to the upper portion of the base is not good. After a couple of weeks of use, you would need to screw it super tight to have it able to hold the boom of the stand at the desired height. This is also a problem in cases where the floor or carpet is not perfectly even - the screwing mechanism will not prevent the boom from swinging around which is quite frustrating. Furthermore, when you move the boom around, the twisting motion will "unlock" the screw and the whole boom will fall down. Not cool if you happen to be speaking at the same time.

One more negative aspect of this product is that it is impossible to have the boom in a horizontal position and extended at maximum. If that's a setup you need to achieve, be prepared that you'll need to put some weight to the legs of the stand, otherwise it just falls over.


Overall, if you're looking for a stand you're going to be using for a long time, I'd advise you to look for something of a higher quality. This one is really not worth it in the long run. I already sold mine.
handling
stability
quality
4
0
Report

Report

G
It holds my mic up..side down. Which is actually good.
G-Evans 30.04.2018
For the price i didn't expect much but having the smaller version as a bass drum mic stand i knew milennium stuff is usualy decent in spite of the low price.

The metal mechanism on the boom is definitely more durable then the even lower cost plastic series meilennium offer however in my specific use case i have experienced some stability issues.

i'm using it probably in the extremes of what it is made for. it's at it's full height with the boom arm out straight to the side. As i have the stand behind my drum throne, with the boom over my head. Also with a long gooseneck attached to bring the mic around and down in front of me.
At these angles and with the extra weight the boom droops a little over time, and i've noticed with the heavy gooseneck there is no way the mechanism to clamp the boom pole will ever tighten enough to hold this setup at any angle other than hanging straight down, but i need it to hang straight down so thats fine for me and it would certainly be expecting a lot from it to do anything but that.

I also need to be able to swing the whole thing off to the side when i don't need it and so the straight stand part of the mechanism deals with this fine, i was worrried it might come loose and drop down but so far it hasn't. I do however need to weigh the feet down with sandbags to be able to do all of this without it just tipping over, but i fully expected that.
For a practice room it is all that i need. if i was gigging with it i would probably buy a much heavier duty stand that i know is rock solid in every way.
For the price i can't complain about how well it holds up.
handling
stability
quality
1
0
Report

Report

E
Millenium MS 2003 Mic Stand Review
Edwin' 22.09.2019
So, I've bought two of these stand for my studio. One of them I'm using for video recording with pretty light Behringer dynamic microphone and another one for Rode NT-1 combined with Micsreen.
Why am I giving "okay" instead of "good" or "very good". Well, this Mic stand with Boom arm actually works well as a stand for dynamic mic during a gig or video recording. But I'm not happy about it as a stand for my condenser mix, especially combined with Mic Screen. It will be more clear when you see the pros and cons.

Pros:
1. It's just a classy and good mic stand with pretty good Boom Arm for a dynamic microphone. It's already handled a few gigs and few hard rock videos, what I'm happy about.
2. Good price comparing with other microphone stands with boom arm.
3. The relation between price and quality - good.

Cons:
1. You got to be really careful while changing heights because it feels that it isn't hard to break it and it would not fix the heights anymore.
2. The purpose of this mic stand - for dynamic and light microphones, it's definitely not the best choice for condenser mics.
3. This microphone stand barely handles Mic screen (it's too big weight for this mic stand to handle but you can risk it).

In conclusion - it's okay. Price is really good it works fine at gigs, it handles dynamic microphones. I would recommend it for the beginner bands or artist who likes to practise a lot or have a lot of live plays. What I also would recommend is: you shouldn't save few euros for quality of your studio, so I would buy other Millenium stand for a condenser mic, which works perfect for condenser microphones and keep it stable. For 15 Euros, the price of this mic stand, you wouldn't expect to get the best quality possible, would you?

Have fun, you guys!
handling
stability
quality
5
0
Report

Report

T
USefull for home usage
Tan1973 29.12.2023
It is working fine with my Rode NT-1 A
handling
stability
quality
0
0
Report

Report

AS
A little wobbly
Adonis Storr 07.11.2017
The microphone stand was the one thing we saved money on from the home recording studio setup. While the metal is very firm the main upright shaft has an unnerving wobble, certainly not something you want holding up your very expensive microphone. As long as you don't touch it it should be OK though - I don't imagine it falling over unless I was recording a drunken or uncoordinated musician. If you're on a very tight budget then this is OK, otherwise I would go with something slightly more expensive to ensure a more rigid stability. Will probably end up using this for a cheaper dynamic vocal mic.
handling
stability
quality
1
0
Report

Report

J
works with some upgrades only
Jake's 18.12.2020
I ordered Shure SM57 and this stand came with it. I dont know if the others has same issues, but knob on one arm cannot be turned into position of mic well, so I had to glue it and fix that, now I can use it for my 4x12 Mesa cab for recording.. overal quality is good
handling
stability
quality
0
0
Report

Report

AM
Low price, low stability.
Alex Mik. 20.02.2014
I've ordered this stand together with a Røde NT-1 to record some vocals at my little bedroom studio. Assembling it was pretty easy and took not longer than two or three minutes. However, as soon as I tried to put the NT-1 and it's shockmount (weighing about 326 g) on it, the stand would simply not stop falling down. No matter how I set it up, now matter how stable it looked at first, after a few minutes it would crash down. Luckily, I managed to catch it every time before it hit the ground and something was damaged. Not recommended for heavy (or expensive) microphones.
handling
stability
quality
3
0
Report

Report

JO
It's Ok...
João Osório 14.12.2020
It's ok for the price.
You need to tighten it quite a bit or else it shakes and/or gets a bit loosened.
It struggles to hold an SM57 when the boom arm is fully extended, which is kind of disappointing.

But I guess if you need a cheap stand to beat up and just set and forget, this is fine. Although, I wouldn't put any mic on it that costs more than 100€
handling
stability
quality
0
0
Report

Report

F
Ok for home use, some faulty construction
Florian4355 25.02.2014
This stand has two flaws: First, the arm with and the part with the pivot ist screwed to the lower part, what causes it to be very loose and rotate easily if the plastic nut underneath it ist not tightened enough - which is nearly impossible. It works best to turn the whole arm an hold the steel rod tight.
Second the knob on you use to fasten the arm is made out of thin plastic, contains only a thin nut and the thread of the axis cuts itself into the plastic behind the nut. Mine broke after a few days to pieces, so I replaced it with a better knob. A butterfly nut would also do the job properly.
handling
stability
quality
4
0
Report

Report

A
Attick 02.10.2019
It's probably an ok stand if you're just holding a microphone, however, mine really stuggles with stability regardless of what is holding. I bought this with a thoman Windscreen XL, and i don't really trust all that weight in this low cost stand. it really tips to the side of the weight and i don't think it's very safe to have my microphone there. Finish wise it looks pretty good. It may be my model that is a bit tipsy but i guess wether you buy this or not really depends on what you're placing in the stand, it's a no no for heavy wind screens in my opinion. All the parts connect pretty well and they stay that way, it just may not be very stable.
handling
stability
quality
0
0
Report

Report

Millenium MS 2003