Millenium MS 2002 Mic Stand

Short Microphone Stand

  • Ideal for guitar amp, drums, wind instruments, etc.
  • All metal construction
  • 3/8" Thread
  • Adjustable from 50 - 70 cm
  • Extendable gallows from approx. 40 - 60 cm
  • Weight: 1.45 kg

Further Information

Height in mm 500 mm – 700 mm
Boom Arm Length in mm 400 mm – 600 mm
Colour Black
Base Tripod

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium MS 2002 Mic Stand
36% bought this exact product
Millenium MS 2002 Mic Stand
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$15.70 Add to Basket
Millenium MS 2003
16% bought Millenium MS 2003 $16.75
Millenium MS 2005
8% bought Millenium MS 2005 $11.85
Fun Generation Mic Stand
6% bought Fun Generation Mic Stand $9.79
K&M 27105
5% bought K&M 27105 $23.75
Our most popular Microphone Stands
3852 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.1 /5
  • handling
  • stability
  • quality
Total
handling
stability
quality
Probably better than the other cheap Millenium stands
Riccardo D., 24.09.2018
I have a project studio/rehearsal room, so I need quite a few mic stands, and as it often happens by Murphy's Law, you'll need 8 at the same time when you just have 3-4 good ones.

For this reason, I bought several cheaper/lower quality stands, including plenty of Millenium ones.

It seems to me that the 2002 is the best of the bunch among cheap ones. The shorter stem results in additional sturdiness (relatively!). Besides, this height is just right for drums, percussion and most winds. It would also be good for amps, but personally I prefer other systems for that (clamps, mics hanging from their "tail", etc).

The normal footprint and low weight of this stand can make for unstable equilibrium. I would advise against using it with your boutique condensers, especially if the boom is extended. Well, common sense I guess.

Bottom line: A serious stand, suitable for real live use, weighs and costs 2-3 times as much as the 2002. Considering this, the 2002 remains a useful and reasonably priced addition especially as a spare/backup - while still 50% more expensive than the taller, flimsier and nearly useless 2005.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Maybe I should've lowered expectations...
Peter V_, 06.07.2020
...but this mic stand is kind of underwhelming. I came across a few different stands by now since I bought it and it's very lightweight (which is never good for any stand), the top element has an expendable piece but it doesn't have a stopping rim and when fully extruded it's unstable (I fear it's going to fall out) and the point where the bottom piece is screwed on the top piece requires it to be fully tightened, however then I can't rotate things around because the plastic cover is actually a set part of the top piece not a tightening element...
Admittedly it's not an expensive piece of equipment and it does the job about half the time, but if I need a good reach or need to use expensive microphones then this is not the right tool.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Great for the price
jackthemicman, 08.07.2020
Having used several budget mic stands this is probably one of the best in terms of stability and build quality without spending substantially more money. I purchased two and use one regularly on snare top and kick. They're small enough to get into limited spaces in between a drum kit and the extendable boom arm is really useful when space is tight. There are some plastic elements which I can see becoming worn down with time however the attachment for the boom arm is excellent and the legs are sturdy plus these being metal is a definite benefit. I wouldn't recommend these for use in a busy music venue or on crowded stages as the plastic elements could easily be damaged or even broken, however for a home studio or some cheap backup replacement stands I can't fault them. I'd be a bit more sceptical putting heavier mic's such as larger condensers or valve mic's on these stands as I can see that they have the potential to drop or be knocked over however you could say the same about a lot of stands in this price range (and even the more expensive mic's such as K&M's are prone to this occasionally).
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
handling
stability
quality
Not credible
GiftAF Beats, 12.07.2020
The plastic that you can see in 9 photos has a crack. Everything was, as always, well-packed and the box itself was delivered in good condition, I think the factory does not really care about quality. I took a stand for recording an acoustic guitar, I wanted to use my mic for this (Blue Baby Bottle). The stand does not look reliable and I decided to just put it in the pantry and not risk my microphone. it would be good for recording drums on small and light microphones, better add a few dollars and buy a more reliable stand. Buy at your own risk)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$15.70 €13.36
The shipping costs are calculated on the checkout page.

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
Online Guides
Drum Mics
Drum Mics
Miking up and recording a drum kit is a fairly complicated procedure, and this can apply equally to choosing the right mics for the job.
 
 
 
 
 
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(2)
Recently Viewed
Behringer 140 Dual Envelope/LFO

Behringer 140 Dual Envelope/LFO; Eurorack module; two independent analog ADSR envelope generators; for each envelope: manual trigger button, Gate input, sliders for Attack, Decay, Sustain and Release, 2 signal outputs and inverted output; analog LFO with 5 waveforms; sliders for...

Recently Viewed
Harley Benton Dullahan-FT 24 BKS

Headless Electric Guitar Ergonomically shaped alto body, Maple neck, Bolt-on neck attachment, Maple fretboard, Black offset dots fretboard inlays, Modern C neck profile, Fretboard radius: 350 mm (13.78"), Scale: 648 mm (25.51"), Nut width: 42 mm (1.65"), Graph Tech...

(1)
Recently Viewed
Presonus Studio One 5 Pro UG 1-4 Pro

Presonus Studio One 5 Professional Upgrade 1-4 Professional / Producer (ESD); Audio MIDI Sequencer (DAW); upgrades Studio One 1-4 Professional / Producer to Studio One 5 Professional; straightforward single window operation; straight drag and drop functionality; project page allows for...

(1)
Recently Viewed
Electro Harmonix Oceans 12 Reverb

Electro Harmonix Oceans 12 Reverb; Effects Pedal for Electric Guitar & Bass; Based on the Oceans 11 with even more reverbs and functionality; two simultaneous, independent, stereo reverb engines; 24 Presets and advanced I/O allowing for stereo in/out or mono...

Recently Viewed
Aston Microphones Spirit Black Bundle

Aston Microphones Spirit Black Bundle - Limited Edition; contains Aston Spirit Black and Swift Shield; Aston Spirit: Large Diaphragm Studio Microphone, Polar Pattern: Omni/Cardioid/Figure-of-Eight, Frequency Response: 20 Hz - 20 kHz (+/- 3dB), Equivalent Input Noise 14dB A-Weighted, max. SPL:...

Recently Viewed
Stairville LED Vintage Bowl 50 RGBA

Stairville LED Vintage Bowl 50 RGBA DMX, 60 W LED, 50 cm; decoration element for stages, clubs and events; stable metal construction; illuminated reflector with unique look; technical data: Light source: 60 Watt RGBA 4in1 LED; Control: DMX (4/6/8 channels),...

Recently Viewed
Midas Compressor Limiter 522 V2

Midas Compressor Limiter 522; 500 Series Modular Compressor/Limiter; rotary knobs for Treshold, Ratio, Attack, Release, Gain and Dynamic Presence; HP Sidechain Filter (200 Hz); LED Meter for Gain Reduction and Output Level; Designed and engineered in the U.K.

Recently Viewed
Presonus Studio One 5 Pro UG EDU

Presonus Studio One 5 Professional Upgrade 1-4 Professional / Producer EDU (ESD); Audio MIDI Sequencer (DAW); Educational version (requires proof of eligibility); upgrades Studio One 1-4 Professional / Producer to Studio One 5 Professional EDU; straightforward single window operation; straight...

Recently Viewed
TC-Helicon Go Twin

2-Channel audio / MIDI interface for mobile devices Integrated microphone preamplifier, Phantom power: +48 V, 2 Microphone / line / instrument inputs: combo XLR / jack 6.3 mm, 2 Line outputs: 6.3 mm jack balanced, Stereo headphone output, 2...

(1)
Recently Viewed
Behringer 112 Dual VCO

Behringer 112 Dual VCO; Eurorack module; two identical analog VCOs in one module; selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs...

Recently Viewed
Harley Benton Dullahan-AT 24 TBK

Headless Electric Guitar Ergonomically shaped alto body, Maple neck, Bolt-on neck attachment, Maple fretboard, Black offset dots fretboard inlays, Modern C neck profile, Fretboard radius: 350 mm (13.78"), Scale: 648 mm (25.51"), Nut width: 42 mm (1.65"), Graph Tech...

Recently Viewed
Darkglass Element Cabsim/Headph. Amp

Darkglass Element Cabsim/Headphone Amp; Effects Pedal for Electric Guitar & Bass; practical practice tool; intuitive operation using three fully-tactile slider potentiometers with positioning LED's; 5 cabinet simulations; Aux In & Bluetooth to listen to back in tracks while playing, rehearsing,...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.