K&M 18810

Keyboard Table

  • Two-sided snap-in clamping screws for height adjustment
  • Support arms are individually adjustable to fit the size of the keyboard
  • Flat pack size
  • Load capacity max. 80 kg - additional 25 kg with optional second level (not included)
  • Weight: 8.5 kg
  • Height: 600/1020 mm
  • Support distance adjustable from: 180 - 790 mm
  • Support depth: 345 mm
  • Installation dimension: 1050 x 575 mm
  • Suitable attachment: Article number 386462 (not included)

Further Information

Keyboard Supports 1

These are other customers' choices:

Customers who looked at this item have bought these:

K&M 18810
62% bought this exact product
K&M 18810
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$108 Add to Basket
K&M 18950
7% bought K&M 18950 $113
Millenium KS-2000
4% bought Millenium KS-2000 $74.85
K&M 18810 Red
2% bought K&M 18810 Red $122
Fun Generation Universal Stand
2% bought Fun Generation Universal Stand $31.27
Our most popular Keyboard Stands
677 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 / 5.0
  • stability
  • handling
  • quality
342 written ratings Read all reviews
Total
stability
quality
handling
Beautifully strong
12.07.2016
I have just suffered a double braced X stand failing under the weight of my Kawai MP7, damaging the Kawai and some other pieces of equipment. Fortunately the stand was bundled with the MP7 so I have some legal redress against the store (which is NOT Thomann).

I look after my equipment because I want things to look good and work properly. After this accident the first place I looked was K&M because I wanted a brand that I knew I could trust and that wouldn't cut corners on quality.

The stand arrived and was very easy to put together. Just a case of inserting the legs and cross pieces and screwing on the heavy duty hand tightened nuts. I also purchased the additional arms 18813 to place an additional level above. These, again, just hand tighten onto the main frame. The second level is adjustable for height and the angle of tilt. In addition I purchased the additional 18819 tray for my keyboard and mouse. This tray fits securely over the 18813 arms and is sufficiently strong to take the full weight from both your arms without flexing or moving. I set the 18813 arms wide enough that I can still fit and use the music stand on the Kawai but at this width I needed to reverse the bolts on the arms so that the knobs on the nuts were on the inside. Set up this way the tray fits properly. If you didn't need the arms so far spaced then no change would be necessary. The arms adjust high enough to accommodate the music stand but I will need to remove the tray to use music on it. This is ok for my usage of the Kawai as a separate piano or as a MIDI controller for my DAW.

The stand is very well made. It is sufficiently big enough for a heavy 88 key digital piano but it is an easy job to move the fittings for smaller boards. The sturdy legs adjust with a sprung knurl wheel. The leg holes are marked with numbers to facilitate getting both sides level. Some reviewers have commented that this stand is best for the studio because it doesn't fold. But I would say that as it only requires 4 hand tightened nuts to be removed to dismantle it into a flat packed unit and reassembly takes a couple of minutes it is eminently suitable for gigging musicians too. We all like convenience but a convenient stand has caused me heartache. I'd rather have peace of mind with a quality stand.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
handling
Pretty Good and usable
Dmitriy K., 26.03.2018
I have it about 7 months and I do not have any negative feedback. It is VERY stable and reliable. My piano weight is 23 kgs but it looks like even if it been double heavier it would stay stable enough.
The only probably inconvenient thing is get it upper and lower. That's why I took off one handling star.
I think for home and studio this is great decision.
But if you are going to travel often and assemble or disassemble stand then I would suggest to get something different.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$108 €96.64
Plus $33.80 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-33
FAX: +49-9546-9223-24
Online Guides
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
 
 
 
 
 
 
 
 
 
 
test results:
* The prices shown exclude VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
(1)
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

(1)
Recently Viewed
IK Multimedia UNO Drum

IK Multimedia UNO Drum; analog/PCM drum machine; 6 true analog voices for kick, snares, claps, and hi-hats; 12 PCM voices with 54 samples; freely layer analog & PCM sounds with 11-voice polyphony; editable drum sound parameters like level, tune, decay...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

(3)
Recently Viewed
TC Electronic Polytune 3 Noir

TC Electronic Polytune 3 Noir; Effects Pedal for Electric Guitar; compact polyphonic tuner/buffer, tuner in effectpedal size, Bonafide buffer circuitry preserves your tone through long cable runs and multiple effects, polyphonic tuning - tune all strings simultaneously, fast chromatic tuner...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

RCF Art 312 MK III - full range passive speaker, 12"/1", 300W, 90x70° 12" woofer and 1" driver with 1.5" Mylar diaphragm, 8ohm, 127dB max, Speaker Twist in/out, plastic housing, pole mount adapter, 4 x M10-Flying points and 3 handles,...

(1)
Recently Viewed
Jazzlab saXholder PRO

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

(2)
Recently Viewed
Harley Benton Custom Line Thunder 99

Guitar Power Amplifier in Pedal Format Compact power amp pedal for electric guitar, For direct connection to any preamp, pedal or effects unit, Power: 2 x 50W to 4 ohms, For 4 - 16 ohm speakers, Master volume controller,...

Recently Viewed
J. Rockett Audio Designs The Dude V2

Effect pedal for electric guitar Overdrive, Delivers classic D-Style ODS sounds and feel, Less aggressive volume controller than previous version, True bypass, Controls for Level, Ratio, Treble and Deep, Bypass footswitch, Input / Output: 6.3mm mono jacks, Metal housing,...

Recently Viewed
K&M 21316 Select

K&M 21316 Select, large carrying case for speaker and hand crank stands, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, dimensions: 1200 mm, weight: 2,1kg, colour: black

Recently Viewed
Jazzlab saXholder PRO XL

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

(1)
Recently Viewed
the t.bone free2b

the t.bone free2b, microphone wireless system, 2.4 GHz wireless plug-on microphone system for dynamic mics, without phantom power, plug-n-play XLR transmitter & receiver, 2.4 GHz band, 32 bit / 48 kHz hi-resolution audio quality, 6 channels, transmission range up to...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.