Millenium KS-2000

Keyboard Stand

  • Height adjustable
  • Load-bearing capacity up to 80 kg
  • Weight 8.9 kg

Dimensions:

  • Width: 710 mm to 1020 mm
  • Depth: 320 mm
  • Height: 620 mm - 790 mm

Further Information

Keyboard Supports 1

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium KS-2000
36% bought this exact product
Millenium KS-2000
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$75 Add to Basket
Gewa Basix Keyboard Stand
10% bought Gewa Basix Keyboard Stand $34.40
K&M 18810
10% bought K&M 18810 $109
Fun Generation Universal Stand
10% bought Fun Generation Universal Stand $31.58
K&M 18950
8% bought K&M 18950 $114
Our most popular Keyboard Stands
200 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 / 5.0
  • stability
  • handling
  • quality
106 written ratings Read all reviews
Total
stability
quality
handling
It is great. a minimal design flaw, no brainer
Krausz, 31.08.2015
It is sturdy, stable, and can hold perfectly a Studiologic SL990 of 20 kg. The height is just fine, in the minimum position where one can block the legs with the 4 screws this way comes on 75 cm from the ground level to the keys top in my case. If you do not use those 4 screws, you can lower an additional 3 cm. Anyway lower than an actual piano, so unless your keyboard is not particularly huge [in height], you can have a comfortable hight setting.
The only issue are those screws which hold together the extension of the two lateral parts. Those are disposed "looking" downwards at almost the middle of the stand. And in my case, I repeatedly hit my kneecap in them each time I sit down to play. One solution would be to throw away one screw, and the stand is stable, because the other screw holds the distal tube. Another solution would be to throw away the above mentioned screw and get a power drill, and drill a horizontal hole through the external quadratic tube and the internal inox tube, and put a regular screwer holding everything together. Obviously who designed this stand was somebody who never played any keyboard on the prototype or was a short person, or used a higher position of the stand. A suggestion [for the designer] would be to place those 2 screws in horizontal, facing each other, and not downwards. This way it doesn't bother anyone's knee [who is tall], and also much easier to put together.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
quality
handling
Good quality and lightweight.
31.07.2015
I was looking for a vintage 'legs' style stand to go with my Elka X50 clonewheel organ. I originally purchased a K&M 18950 but while it was incredibly sturdy it was also too heavy for my needs, weighing nearly as much as my organ and far more than the Roland VR-09 board which I use for gigging.

The KS-2000 is just as sturdy, easy to use and I can pick it up in one hand; with a keyboard bag over my shoulder, the stand in one hand and an amp in the other I can make just one trip into the venue. The adjustments are set and forget and it looks a lot cooler on-stage than a regular X stand, insomuch as a keyboard stand can be cool. It has a few cm of height adjustment advantage on the K&M which I prefer for gigs when I might switch between sitting and standing depending on whether I'm playing piano or organ sounds. I would be confident using this with a heavy keyboard like a stage piano and it deals with my organ well. Lots of space between the legs for FX, cables, bass pedals etc. I have strapped a DI to the underside to speed up my setup, which looks a bit jury-rigged from my angle but is unobtrusively behind the corner joints for the audience.

The paintwork looks like it may become scratched eventually, but after a few weeks of regular gigging I haven't experienced any major problems outside of road-rash on the ends when packing it down. My only criticism is lack of add-ons; a second tier attachment or mic stand holder would be appreciated. A chrome version might be nice too but now I'm nitpicking.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
$75 €66.39
Plus $33.90 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-33
FAX: +49-9546-9223-24
Online Guides
Controller Keyboards
Controller Keyboards
At the simplest level, a controller keyboard, also commonly known as a "master" keyboard.
 
 
 
 
 
test results:
* The prices shown exclude VAT. and are valid as long as stocks last. Please click here for international shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. All invoices will be issued in EUR.
(4)
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

(12)
Recently Viewed
Behringer Vocoder VC340

Vocoders Analog vocoder and string ensemble synthesizer, Keyboard with 37 semi-weighted and velocity-sensitive keys, "Human Voice" (Male and Female) and "Strings" sections mixable for classical string and choir sounds, Analog vocoder with tone control, BBD chorus for ensemble effects,...

Recently Viewed
Mooer GE 300

Multi-Effects Processor Integrated ToneCapture function with 4 modes (Amp / Stomp / Guitar / Cab) to capture the sound of your favourite gear, 108 High quality amp simulations, 43 IR (Impulse Response) speaker cab simulations, Support for additional Impulse...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

Recently Viewed
Gator Frameworks Mic 0822

Gator Frameworks Mic 0822, Mic Stand for Desktop & Bass Drum, telescoping boom mic stand for desktop, recording, kick drum and guitar amps, for microphones up to 1.5 lbs (700 g, approx.), boom counterweight weighs 2.5 lbs (1140 g, approx.),...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

Passive Full-Range Speaker Rated power: 300 watts (RMS), Equipped with: 12" Woofer and 1" driver with 1.5" Mylar diaphragm, Impedance: 8 ohms, Maximum level: 127 dB, Dispertion pattern: 90° x 60°, Input and output: Speaker Twist, Plastic housing, 4...

Recently Viewed
Fender CLSC SRS Mustang/Duo Case

Guitar Case Hardshell case for Fender Mustang/Duo Sonic models, Lining on the inside: Red plush, Vinyl wrapped steel core carry handle, Large storage compartment with lid, Steel draw latches, 1 Locking latch with key set, Internal dimensions: 100.33 cm...

Recently Viewed
ADJ Contour

ADJ Contour; LED mirror ball effect; multi-colored beams crisscross back and forth at different speeds similar to a classic "fan style" effect; 36 lenses that project multi-colored beams of light from 27x 1.5W RGB LEDs; 15 built-in lightshows; controlled by...

Recently Viewed
iZotope Music Production Suite 2.1 CG2

iZotope Music Production Suite 2.1 Crossgrade 2 (ESD); plug-in bundle; crossgrade from iZotope Music Production Suite 2 or RX Post Production Suite 3 to Music Production Suite 2.1; extensive collection of software tools for music production, mixing and mastering; contains...

(1)
Recently Viewed
Taylor Capo Bright Nickel

Taylor Capo Bright Nickel for Acoustic-Guitars (Steelstrings); Made in USA

Recently Viewed
Softube Volume 3 Upgrade Volume 2

Softube Volume 3 Upgrade Volume 2 (ESD); plugin bundle; upgrades Softube Volume 2 to Volume 3; comprehensive collection of effects for professional music production containing 22 plugins: Bass Amp Room, Drawmer S73 Intelligent, Master Processor, FET Compressor, Fix Flanger and...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.