RME Fireface UFX III + SoundID
Bundle offer comprising
RME Fireface UFX III
USB 3.0 Audio Interface
- 188-Channel, 24-bit / 192kHz AD/DA converter
- DURec (Direct USB Recording)
- SteadyClock FS
- MADI I/O (64 channels)
- TotalMix FX
- Built-in DSP
- +48V phantom power
- TFT display
- AKM chips (AK5574 AD / AK4490 DA converters)
- DC-coupled analogue outputs
- Lock keys
- Remap keys
- USB 3 Class Compliant
- Construction: 19" / 1 U
- Dimensions (W x H x D): 483 x 44 x 210 mm
- Weight: 2.8 kg
- Expandable with optional RME ARC remote control (not included)
Connections
- 4 Mic/Line inputs: XLR/jack 6.3 mm combo
- 8 Line inputs: 6.3 mm jack balanced
- 2 Line outputs: XLR
- 6 Line outputs: 6.3 mm jack balanced
- 2 Stereo headphone outputs: 6.3 mm jack
- 2 Optical inputs and outputs ADAT / S/PDIF
- AES input and output XLR
- Word clock input and output BNC
- MADI input and output
- 2 MIDI inputs and outputs
- Remote input for optional RME ARC
- USB on the front
Sonarworks SoundID Ref Spk & HP w Mic BDL
Sonarworks SoundID Reference for Speakers & Headphones with Measurement Microphone (Box)
- Bundle of measurement microphone and software for speaker and headphone calibration
- Frequency response correction for studio monitors and headphones for the most linear playback possible
- Enables better assessment of recordings and mixes
- Room analysis and automatic room size calculation via numerous measuring points
- Audio Calibration Engine for the most accurate adjustment
- Any number of speaker profiles can be saved
- Comes with calibration curves for over 280 different headphone models
- Target curves can be customized in real time
- Translation Check simulates over 20 different devices and device types for the accurate implementation of a mixture
- Three selectable filter modes: Zero Latency
- Mixed and Linear Phase to optimize filter quality and latency for different listening situations
- Additional settings for mono
- Dry/Wet and Safe Headroom
- Only available in the app: MIDI mapping for various parameters and user presets for predefined output configurations
- Measuring microphone with pre-polarized electret condenser capsule
- Frequency range: 20 - 20000 Hz with measurement protocol
- Polar pattern: Omnidirectional
- Sensitivity: 14mV / Pa
- Inherent noise: 24 dB
- Signal-to-noise ratio: 70 dB
- Dynamic range: 106dB
- Maximum sound pressure level: 132 dB SPL
- requires 48V phantom power
- Connection: XLR 3-pin
- Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software
- Calibration file for 0° on-axis measurements in TXT format
-
Available since November 2026
-
Item number 658904
-
Sales Unit 1 piece(s)
-
Recording / Playback Channels 94x94
-
Number of Mic Inputs 4
-
Number of Line Inputs 8
-
Instrument Inputs 4
-
Number of Line Outs 8
-
Headphone Outs 2
-
Phantom Power Yes
-
Number of S/PDIF Connectors 2
-
Number of ADAT Connectors 2
-
Numer of AES/EBU Connectors 1
-
Number of MADI Connectors 1
-
Ethernet 0
-
Other Connectors USB
-
MIDI interface Yes
-
Word Clock 1xIn, 1xOut
-
Max. Sampling Rate in kHz 192 kHz
-
Max. Resolution Rate in Bits 24 bit
-
USB Bus-Powered No
-
Incl. power supply Yes
-
USB Version 3.0
-
Width 483 mm
-
Depth 210 mm
-
Height 44 mm
-
Connection Format USB port Type B
-
Included in delivery Power Cable, USB-3.0-A to USB-3.0-B Cable, USB-3.0-B to USB-C Cable, TOSlink Cable
-
Zero latency monitoring Yes
-
-
RME USB Audio Interfaces at a glance
-
Display USB Audio Interfaces from $ 2250 - $ 2750
-
Go to product group USB Audio Interfaces
-
Go to product group Audio Interfaces
-
Go to product group Studio and Recording Equipment
-
Show manufacturer details for RME
-
RME Studio and Recording Equipment at a glance