Doepfer A-100 LC1 Low Cost Case

()

Start 360°

This item runs exclusively on an operating voltage of 230 V and therefore requires a voltage transformer to run in your country of United States.

Case for Eurorack modules

Integrated power supply A-100SSB: +12 V / 340 mA, -12 V / 340 mA
A-100LC3 version shortened to 48 HP
Built-in bus board with 12 module slots
Housing made of untreated wood - subsequent painting by user possible
Dimensions (W x D x H): 262 x 158 x 154 mm
Internal dimensions: 48 HP x 3 U
IEC socket at rear
Includes power supply cable

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since May 2017
Item number 413503
Sales Unit 1 piece(s)
System Eurorack
Width 48 TE / HP
Height 3 U
Power Supply Yes
Formfactor Case
Power Supply Specifications +12V/380 mA, -12V/380mA, +5V/100mA, +12V & +5V max 380mA

Show variations of this product

Doepfer A-100 LC1 Low Cost Case

Doepfer A-100 LC1 Low Cost Case Case for Eurorack modules * Integrated power supply A-100SSB: +12 V / 340 mA, -12 V / 34...

$173

to the product

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

$95

to the product

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

$144

to the product

123

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

$34

to the product

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

$77

to the product

154

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

$85

to the product

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

$211

to the product

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

$115

to the product

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

$95

to the product

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

$115

to the product

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

$57

to the product

Doepfer A-156 Vintage Edition

Doepfer A-156 Vintage Edition Dual Control Voltage Quantizer * Vintage edition with black front plate * Converts a conti...

$125

to the product

$173

The shipping costs are calculated on the checkout page.

Sales Rank

in Eurorack housings

This is what customers who viewed this product bought

Behringer Eurorack Go

$159

11%

bought

Tiptop Audio Happy Ending Kit Black EU

Behringer Eurorack Rack

$75

28 Customer ratings

5 19 Customers 4 7 Customers 3 2 Customers 2 0 Customers 1 0 Customers

4.6 / 5

features

quality

Review guidelines

20 Reviews

Great choice for a small setup

Tanj 09.07.2022

I wanted to put together a small Eurorack setup and this case is perfect. It's small & portable, plus the wood is unfinished so you can paint or varnish it any way you like.
It has just about enough power to run enough modules to fill it, I would have preferred a power switch which is the only reason it drops a star (the power is always on when it is plugged in) but it works great.

I intentionally wanted a case that would limit the amount of modules I could buy because Eurorack has the capacity to be a never-ending cash sinkhole! So this case forces you to think carefully about what kind of setup you need and to choose your modules carefully.

I was going to buy the Cre8 NiftyCase, which is a bargain especially considering it has MIDI-CV conversion built-in but unfortunately it was too shallow for some of the modules I wanted and I didn't want that limitation. So I bought this with a separate Kenton MIDI-CV converter.

When buying a Eurorack case, there are three main things to consider:
1. The depth - different modules have different depths and some shallow cases won't house certain modules. This has the depth needed for pretty much any module, although the right-hand side of the case has power components on the right side so the depth is more limited for a few HP on this side of the case. This shouldn't be a problem, most people will choose modules of different depths so you just put the shallower ones on this side.
2. Power rating - a case's power rating needs to put out enough current to power all the modules you are planning to buy, you need to add up all the power requirements of all the modules you are considering for purchase to make sure the case can power them all.
3. Size - different modules are different sizes in width, so you need to add up the width (measured in HP) of all the modules you are planning to buy & make sure you can fit them all in.

If this case fulfills all of that criteria for you, it's an excellent choice and I can fully recommend it. Good luck and have fun on your Eurorack journey!

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Almost perfect, but really good for its price

Korkri 14.06.2018

This is a really basic modular case, power is not huge but it's way enough for a case of that size.
Only two drawbacks:
-The modules get sometimes stuck as the space between the two rails is a little bit too big, but this not such a big problem.
- The PSU brick is attached on the right side of the case, in line with the AC cord connector. It is a bit a pity as it prevents the installation of deep modules on the right side. If they would have put the brick on the back inside next to the PCB it would have been perfect.
They also could have used shrouded header connector for the PSU for the careless ones that could connect their modules the wrong way but if you are used to it, it is not a big deal :D
I would buy that case again, only reason I'd see to separate with it would be to get a bigger one.

Report

It's reliable Doepfer

SunPulse 15.03.2021

I bought this case for expanding my modulation sources and it does well. I don't know how it is for audio modules as I don't have any in it. My only wish is that it doesn't have a power switch. The one thing I did encounter which wasn't a biggie, I live in Canada and it shipped with a European style power cord. But a regular North American cord plugs into it, no worries.

Report

Just buy

Nate C 20.02.2019

best eurorack case/power supply on the market. Dual voltage for use outside of Europe without a converter, just need an adapter. rainmaker + this case = guaranteed satisfaction.

Report

Read all reviews

Doepfer A-100 LC1 Low Cost Case

Case for Eurorack modules

This is what customers who viewed this product bought

28 Customer ratings

You have to be logged in to rate products.

20 Reviews

Smart Navigator

Served with love!

Doepfer A-100 LC1 Low Cost Case

Case for Eurorack modules

This is what customers who viewed this product bought

Accessories & matching items

28 Customer ratings

You have to be logged in to rate products.

20 Reviews

Compare options

Smart Navigator