To the page content

the t.bone Ovid System Sax Bundle

3.5 out of 5 stars from 4 customer ratings

Bundle offer comprising

the t.bone Ovid System CC 100

Condenser Clip Microphone for Ovid System

  • Directional characteristic: Cardioid
  • Frequency response: 20 - 20,000 Hz
  • Flexible gooseneck for an easy instrument setup
  • 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)
  • Gooseneck length: 130 mm
  • Cable length: 2 m
  • Easy to install and can be used with different instrument clips (not included, must be ordered separately)
  • Includes an XLR phantom power adapter (phantom power required) and a foam windshield

the t.bone Ovid System Sax Clip

Modular saxophone microphone clip for Ovid systems

  • Easy to install without tools
  • Black rubber end caps protect the instrument from damage
  • Locking screw
  • Also suitable for trumpet, trombone etc.
  • Not suitable for soprano saxophone

the t.bone Ovid System Case

Plastic Case

  • With recess for all Ovid system microphone clamps and the CC 100 microphone
  • Outer Dimensions: 30 x 23 x 7.5 cm
  • Available since May 2012
  • Item number 282632
  • Sales Unit 1 piece(s)
  • Microphone Set For Guitars No
  • Microphone Set For Drums No
  • Microphone Set For Vocals & Speech No
  • Microphone Set For Cameras No
  • Microphone Set For Wind Instruments Yes
$80
The shipping costs are calculated on the checkout page.
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

A clip mic that won't get in the way

The Ovid System CC 100 from the t.bone is a condenser clip microphone for recording musical instruments. Its cardioid polar pattern ensures that the sound of the respective instrument is picked up directly, and as it is designed for the t.bone's Ovid system and features a three-pole mini-XLR connection as its signal output, it is suitable for use with wireless systems from both the t.bone and AKG. As a condenser microphone, the CC 100 of course requires phantom power, so the scope of delivery includes an XLR phantom adapter that can also be used to connect the mic to a mixing desk, and the integrated 2m cable additionally allows a high degree of freedom. Altogether, this range of features makes the t.bone Ovid System CC 100 an affordable microphone for recording instruments with a direct, high-quality sound. In this bundle, the microphone is supplied with a suitable clip for attaching it to the saxophone and a robust case.

the t.bone Ovid System CC 100 clip microphone

Optimum signal transmission

The t.bone Ovid System CC 100 covers a frequency response from 20Hz to 20kHz with a maximum sound pressure level (SPL) of 110dB. The mic's sensitivity is 8.7mV/Pa, which means that slightly more amplification is required for an optimum signal transmission than in the case of a microphone with a high sensitivity level. Thanks to its signal-to-noise ratio of just 73.7dB, the proportion of noise in the signal is also minimised. It should be noted, however, that this microphone must be handled with the utmost case, as even dropping it can result in severe damage. For this reason, the microphone should always be stored in the supplied microphone case when not in use, and it should only be cleaned using a moist cloth.

the t.bone Ovid System Sax Clip

Direct recording for instruments

This extremely compact clip microphone, which weighs just 88 grams, is ideal for miking up instruments during live performances, where users will certainly appreciate both its small design envelope and wide frequency response, while its cardioid polar pattern will keep the signal virtually free from unwanted sound from sources in the background. It can be attached directly to the instrument with the clip included in the bundle. By adding a wireless transmitter to the setup, musicians can then move around freely on stage without having to pay attention to how far their instrument is from the microphone. What is more, the scope of delivery additionally includes a foam windshield to prevent the occurrence of unwanted noise when the microphone is moved around.

the t.bone Ovid System CC 100 with accessories

About the t.bone

Since 1994, the t.bone has been one of Thomann’s in-house brands, and its name can be found on devices such as headphones, wireless systems, in-ear equipment, and various microphones and matching accessories. “the t.bone” products are made exclusively by renowned companies who also manufacture products for other well-known brands. This provides a clear advantage: Brand-quality products at very reasonable prices. And word gets around: One in seven Thomann customers has already bought at least one product from the t.bone.

Flexible connectivity

The bottom of the t.bone Ovid System CC 100's gooseneck tapers off into a removable 2m cable, which features a three-pin mini-XLR plug that can be connected to the t.bone CC 100 EW phantom adapter and is lightweight enough to be pleasantly inconspicuous. The adapter in turn allows the microphone to be connected to a mixing desk, a multi-track recorder, or an audio interface, while the t.bone's optionally available Ovid System HD Cable EW lets the user connect it to Sennheiser's EW-series wireless systems. Last but not least, the gooseneck itself, which is 13cm in length, makes it possible to precisely align the t.bone Ovid System CC 100 microphone to its sound source.

4 Customer ratings

3.5 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

features

sound

quality

4 Reviews

google translate de
Unfortunately there was an error. Please try again later.
D
Für Trompeten leider nicht zu verwenden
Dominik754 19.06.2012
Das große Problem mit dem Ovid ist, dass es die Ventilgeräusche derart laut und ungedämpft überträgt, dass man es nicht sinnvoll einsetzen kann.

Befestigt man es z.B. an einem Notenständer, lässt es sich zwar wie erhofft benutzen, ist aber praktisch wertlos gegenüber einem "normalen", für Bläser geeigneten Mikro wie dem SM57.
features
sound
quality
3
2
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
p
Angemessen
pipensmok 05.08.2012
Die Montage vom Klettband ist zwar etwas fummelig, macht aber das Teil unheimlich flexibel im Gegensatz zu Klemmen. (paßt auch an einen F-Bass). Das hauchzarte Kabel reicht bis auf den Boden, wo das Phantomspeiseteilchen steht. Für live und das Geld unschlagbar!
Ergänzung nach einigen Auftritten: Das Kabel ist Schrott! Dem entsprechend Verarbeitungspunkt-Abzug.
features
sound
quality
5
1
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
X8
Alles gut.
X 8 14.08.2012
Ich suchte ein brauchbares Klippmikro für Auftritte. Auf der Bühne war dann alles bestens. Der Sound war gut, die Saxklemme ist praktisch. Keine lauten Klappengeräusche, wenn man das Mikro richtig ausrichtet. Das Mikro hat trotz des geringen Preises alle Anforderungen erfüllt. Das Vorbild für die Kopie kostet das 6-fache und die hatte sich wohl etwas gedacht bei der Entwicklung. Gut finde ich noch, dass ich jederzeit Teile aus der Ovid Reihe nachkaufen kann. Gespannt bin ich, ob das dünne Kabel an dem Mikro lange hält. Da hat man beim teuren Orginal offenbar ein Stecker. Sehr praktisch ist das Köfferchen, der das kleine Mikro im Aufbaugetümmel gut schützt. Ich kann das Mikro nur weiterempfehlen.
features
sound
quality
4
1
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
N
Für den Preis
Norbert853 20.07.2012
ein echtes Schnäppchen.
Dieses System mit verschiedensten Clips für verschiedene Instrumente ist einfach clever. Ich frage mich schon, warum da keiner früher drauf gekommen ist.


Ganz wichtig ist die Platzierung des Mikrofons. Als ich das erste Mal meine Gitarre damit abnehmen wollte, erschrak ich richtig. Ich hatte das Mikro ungefähr über dem Hals/Korpusübergang ausgerichtet - wie man das so macht. Der Klang war richtig dünn und irgendwie "phasig". Ich dachte, das Mikro ist kaputt. Aber beim reinsprechen hatte es einen richtig guten Sound.
Also versuchte ichs das nächste Mal damit, das Mikrofon vom Rand her abzunehmen. Das Klang schon um Klassen besser. Nach einer halben Stunde Testaufnahmen hatte ich dann den besten Platz gefunden.
Ich finde, Thomann sollte Vorschläge mitliefern, wie man das Mikrofon am Besten platziert. Dadurch, dass das Mikrofon sehr dicht am Instrument dran ist, gelten ganz andere Regeln als bei der Abnahme aus einiger Entfernung.

Ich klemme die Gitarre jetzt von unten an die Gitarre - ungefähr auf Höhe des Stegs. Richung Schallloch gibts mehr Höhen, in die andere Richtung wirds dumpfer. Dadurch, dass ich das Mikro von unten nach oben ausrichte, ist das Mikrofon auch relativ Feedbackresistent.

Zur Verarbeitung:
Das CC 100 macht nicht den allerstabilsten Eindruck. Vor allem das Kabel ist mir zu dünn. Mal sehen, wie lange es durchhält. Auch die Zugehörige Gitarrenhalterung hat etwas von einem Spielzeug. Aber dadurch ist es auch extrem leicht, was wiederum hilft. Das solideste Teil ist noch der XLR-Phantomadapter. Wenn man die Stabilität noch nachbessern würde, wäre das System perfekt!
features
sound
quality
9
5
Report

Report