Millenium Desktop Monitor Stand DM2

Table stand for monitor speakers

  • Plate dimensions: 23 x 23 cm
  • Base plate: 24 x 24 cm
  • Infinitely height adjustable from 30-51 cm
  • Load bearing capacity up to 15 kg
  • Weight: 1.7 kg
  • Colour: Black

Further Information

Type Tabletop Stand
Height 300 mm – 510 mm

These are other customers' choices:

Customers who looked at this item have bought these:

Millenium Desktop Monitor Stand DM2
55% bought this exact product
Millenium Desktop Monitor Stand DM2
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$16.65 Add to Basket
Millenium Desktop Monitor Stand DM3
9% bought Millenium Desktop Monitor Stand DM3 $26.99
Millenium Desktop Monitor Mount DM1
9% bought Millenium Desktop Monitor Mount DM1 $13.85
Millenium BS-500 Set
8% bought Millenium BS-500 Set $44.70
K&M 26772 Table Monitor Stand
3% bought K&M 26772 Table Monitor Stand $35.40
Our most popular Studio Stands
282 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 /5
  • stability
  • quality
Total
quality
stability
Good product
Wutwutwut, 25.03.2020
I bought them to use on a home-studio studio table with my ADAMs A5X. Used for a couple of months now.

Pros:
Durable, stable enough (I still suggest you shouldn't try to rock them, to all - there's a limit). The metal is good, the padding for both surfaces is okay, the monitors and stands themselves don't slide at all. Pretty easy to put them together.

Cons:
They can't be set up lower than 30cm, as the description says. To some it may be the key moment in the decision if you need them.
!! Measure the height you need before you buy (practically any) monitor stands !!

Conclusion: good reliable product unless you need something extra, to survive like a earthquake or a party or smth. But in that case you shouldn't look at anything that's not bolted to the wall. or the floor.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Great Home Studio Stand
Germerican Guitarist, 27.03.2020
I bought these to mount a pair of Mackie CR4 monitors on my desk. The stands feel very solidly built and even with the speakers raised to ~40cm, there is very little wobbling or shaking. The lock of the post feels a little thin/cheap, but I've had no issues with the stands slipping.

One clarifying note I wanted to make: In the picture, it appears that the post is offset to the back edge of metal plates when it is actually mounted in the center. I think this makes for a more stable monitor stand, but I can see how someone might prefer the post to be further back.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Don't buy
Mihai Sorin, 07.12.2019
The screws come already screwed in, was very hard to unscrew them (probably used some pneumatic screwdriver).
Expanded at maximum and the tap completely tight, they are unstable, they are rated to bear 15Kg, but my speakers have less 2Kg each, yet the adjustment fell a few centimetres.
So, don't worth the money, even cheap, I've thought they could bear the kilos, so could not be that bad! But they are.

Thank you, Thomann, for your warning attached to the product and for the care you've shown to warn about the rubber bands that might chemically react with the floor in time!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
stability
Stylish and solid
OZLostar, 12.02.2020
I bought the product with my Adam T7V monitors. It has a solid and stylish stance.
If the leg of your desk is balanced, you can use it safely.
Pros: The table where you put the monitor can move four-way up-down-right-left. It is very easy to adjust your monitor to your sitting position.
Cons: The base of my 7 inch monitor is bigger than the stand. I think there is a risk of falling if you position your monitor within your range of motion and crash it. For a safe area, I don't see any problems.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Millenium Desktop Monitor Stand DM2
(282)
Millenium Desktop Monitor Stand DM2

Table stand for monitor speakers Plate dimensions: 23 x 23 cm, Base plate: 24 x 24 cm, Infinitely height adjustable from 30-51 cm, Load bearing capacity up to 15 kg, Weight: 1.7 kg, Colour: Black

  • Type: Tabletop Stand
  • Height min.: 300 mm
  • Height max.: 510 mm
  • Weight: 1,7 kg
Millenium Desktop Monitor Mount DM1
(225)
Millenium Desktop Monitor Mount DM1

Universal table stand for monitor speakers Plate dimensions: 23 x 23 cm, Infinitely height adjustable from 25-40 cm, Table clamp isinfinitely adjustable from 20-55 mm, Load bearing capacity up to...

  • Type: Monitor Stand
  • Height min.: 250 mm
  • Height max.: 400 mm
  • Weight: 1,6 kg
Millenium Desktop Monitor Stand DM3
(136)
Millenium Desktop Monitor Stand DM3

Monitor Table Stand Rubber support surface for a stable stand of the monitor, Loadable up to 15 kg, Inclination adjustable: ± 10 degrees, Cable management, Four rubber feet reduce the sound...

  • Type: Monitor mount
  • Height min.: 235 mm
  • Height max.: 280 mm
  • Weight: 2,8 kg
IsoAcoustics ISO-155
(26)
IsoAcoustics ISO-155

Table Tripod for Speakers / Monitors Allows optimal angle of the speakers in the direction of listening position, Decouples the loudspeaker signal from the ground, Two height adjustable: 76 and 210...

Fluid Audio DS 5
(34)
Fluid Audio DS 5

Table Stand for Studio Monitors Suitable for 4" or 5" speakers, Ideal for placing studio monitors on the desk and acoustically decoupling, Height adjustable: 7.9 or 14.3 cm, Inclination angle: 0 °,...

Fluid Audio DS 8
(15)
Fluid Audio DS 8

Table Stand for Studio Monitors Suitable for 8" speakers, Ideal for placing studio monitors on the desk and acoustically decoupling, Height adjustable between 7.9 - 14.3 cm, Inclination angle: 0°,...

Genelec 8000-323B
(1)
Genelec 8000-323B

Table Tripod For all Genelec 8x3x Series loudspeakers, L-shape, Vertical and horizontal mounting of the loudspeaker possible, Inclinable by 20 degrees (in 10 steps of 2 degrees each), Dimensions...

Genelec 8000-323W
(1)
Genelec 8000-323W

Table Stand For Genelec loudspeakers of the series 8x3x, L-Form, Vertical and horizontal mounting of the speaker possible, Tiltable by 20 degrees in 10 steps of 2 degrees each, Dimensions of base...

$16.65 €15.04
Plus $33 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
Download
 
 
 
 
 
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(5)
Recently Viewed
SSL 2

2-Channel USB-C Audio Interface 24-Bit/192 kHz AKM converters, Mic preamps (62 dB gain range, 130.5 dBu ON), Neutrik connectors, Alps pots, Legacy "4K" switch per channel for sounds inspired by the legendary SSL 4000 series, +48 V Phantom power,...

Recently Viewed
Toontrack SDX The Rooms of Hansa

Toontrack SDX The Rooms of Hansa (ESD); expansion pack for Toontrack Superior Drummer 3 (item 419735); produced and recorded at Hansa Tonstudios Berlin, Germany by Michael Ilbert; 4 different recording rooms: Meistersaal, Live Room, Marble Room, Vocal-Booth as well as...

Recently Viewed
EarthQuaker Devices Afterneath V3

EarthQuaker Devices Afterneath V3 Enhanced Otherworldly Reverberator; reverb effects pedal, ambient, vast, expansive, and magical reverb sounds; 9 selectable modes to change the way the Drag control functions (Unquantized, Unquantized with Slew, Unquantized Volt/Octave, Chromatic Scale, Minor Scale, Major Scale...

Recently Viewed
Harley Benton FRFR-112A Guitar DSP Monitor

Harley Benton FRFR-112A Guitar DSP Monitor, full range flat response powered cabinet for modern digital guitar setup (amp modeling & multi-effect processor); built-in DSP with classic and modern speakers simulations (SIM0, SIM1, SIM2, SIM3); DSP equalizer modes (3-band eq pa,...

Recently Viewed
Taylor 214ce

Steel-String Guitar with PickupFrom strumming to flatpicking to fingerstyle: it delivers a clear, balanced tone with perfect playability and fits neatly into the mix with other instruments. Of course, with the patented Taylor ES-2 electronics with active volume, treble and...

Recently Viewed
Decksaver Pioneer XDJ-XZ

Decksaver Suitable for Pioneer XDJ-XZ, Protects against dust, dirt, liquids and impacts during transport, Made of polycarbonate, Milky transparent surface, High quality, Dimensions (W x H x D): 88.30 x 44.90 x 4.70 cm, Weight: 1.51 kg Note: ...

Recently Viewed
Ortofon Stylus 10

Ortofon Stylus 10; replacement stylus for Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, Concorde STD, TM 10H, LMB 12, SMB 12 and LMA 12 systems; elliptical diamond; colour: black

Recently Viewed
Warm Audio Bus-Comp

Warm Audio Bus-Comp; 2 channel VCA compressor; Selectable discrete opamp stage with CineMag USA transformers; THAT 2180 VCA's; external side chain input; Hi-Pass Filter: 30, 60, 105, 125, 185 Hz; frequency response: 18 Hz to 22kHz; dynamic range: > 120dB;...

Recently Viewed
Arturia AudioFuse Studio

USB 2.0 Audio Interface 24-Bit / 192 kHz, 18 Inputs and 20 outputs, 4 Mic / line inputs: XLR / TRS combo socket, 4 Line inputs: 6.3 mm TRS, Phono input: Cinch, Inputs: 1 - 4 switchable for instruments,...

Recently Viewed
Electro Harmonix 5MM Power Amp

Transistor Amplifier for Electric Guitar Compact amplifier for gaming situations in which no high-performance amplifier is required, Can be used alone or with a distortion pedal, EQ and / or preamp, 1 Channel, Power: 2.5 watts, Controller: Volume, Switch:...

Recently Viewed
Decksaver Boss RC-505

Decksaver Suitable for Boss RC-505, Protects against dust, dirt, liquids and impacts during transport, Made of polycarbonate, Milky transparent surface, High quality, Dimensions (W x H x D): 42.60 x 21.00 x 4.0 cm, Weight: 328 g Note: ...

(1)
Recently Viewed
Ortofon 2M Red

Ortofon 2M Red, Moving Magnet cartridge, ellptical diamond

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.