the t.akustik Iso-Pad 5

Foam pads for studio monitors

  • For acoustic decoupling of studio monitors
  • An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and in 2 different angles (4° and 8°)
  • Load-bearing capacity per pad: 12 kg
  • Dimensions (WxHxD): 170 x 40 x 300 mm
  • Colour: Anthracite
  • Package consist of 2 ISO-Pads

Further Information

Type Studio Monitor Decoupler

These are other customers' choices:

Customers who looked at this item have bought these:

the t.akustik Iso-Pad 5
58% bought this exact product
the t.akustik Iso-Pad 5
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
$14.10 Add to Basket
the t.akustik ISO-Pad 6
16% bought the t.akustik ISO-Pad 6 $15
the t.akustik ISO-Pad 7
6% bought the t.akustik ISO-Pad 7 $16
the t.akustik ISO-Pad 8
6% bought the t.akustik ISO-Pad 8 $18.80
the t.akustik Contact Glue
4% bought the t.akustik Contact Glue $4.71
Our most popular Miscellaneous Acoustic Treatment
1656 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.6 / 5.0
  • quality
567 written ratings Read all reviews
Total
quality
Low price - Does as intended
Steven S, 05.01.2018
Bought these with a speaker and stand bundle to reduce vibrations from the speakers to the stands. Seems to work well, even with loud volumes I have not experienced any vibrations (passed a frequency test).

Pros: These foam pads allow your speakers to be tilted at 4° and 8°, which works great with the stands as these can be placed higher. This allows you to decrease the potential of standing waves between the front and rear walls. It also allows placing your speakers higher than your head while keeping them directed towards you, again improving acoustics (reference: >
Cons: Limitations in angles, but that's what you pay for.

Does the job!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
no more desk-vibrations
Tom9128, 09.10.2017
They came as a set with two new Adam A3X speakers and first I did not unpack them as the speakers were quite OK without any foam underlay.

After a few days, I unpacked the foams and put them under the speakers, just to test and eager to "hear" some difference.

I couldn't hear any difference in the sound reproduction (as I'd expected), but now the speakers are acoustically separated from my desk. This makes a huge difference in the vibrations that the desk is picking up.

So in short, the audio I hear now, is ONLY coming from the speakers and no longer from the speakers and all stuff on my desk that was vibrating along...
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
the t.akustik Iso-Pad 5
(1656)
the t.akustik Iso-Pad 5

Foam pads for studio monitors For acoustic decoupling of studio monitors, An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and...

  • Type: Studio Monitor Decoupler
  • Dimensions: 170 x 40 x 300 mm
the t.akustik ISO-Pad 6
(1442)
the t.akustik ISO-Pad 6

Foam pads for studio monitors For acoustic decoupling of studio monitors, An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and...

  • Type: Studio Monitor Decoupler
  • Dimensions: 210 x 40 x 300 mm
the t.akustik ISO-Pad 8
(1004)
the t.akustik ISO-Pad 8

Foam pads fo studio monitors For acoustic decoupling for studio monitors, An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and...

  • Type: Studio Monitor Decoupler
  • Dimensions: 260 x 40 x 370 mm
the t.akustik ISO-Pad 7
(601)
the t.akustik ISO-Pad 7

Foam pads for studio monitors For acoustic decoupling of studio monitors, An isolation pad consists of two components, which allows you to change the position of the monitor both horizontally and...

  • Type: Studio Monitor Decoupler
  • Dimensions: 230 x 40 x 330 mm
IsoAcoustics ISO-Puck set
(11)
IsoAcoustics ISO-Puck set

Universal Monitor Stand Set Decouples loudspeaker signal from the ground, Stand area per Puck (diameter x height): 62 x 35 mm, Maximum load: 9 kg per Puck, Including: 2 Pieces, assembly...

IsoAcoustics ISO-200
(3)
IsoAcoustics ISO-200

Isolation stands for speakers / monitors Height adjustable from 95 to 215 mm, Adjustable tilt up to 6.5 degrees, Allows you to adjust the speakers for an optimal dispersion pattern in the direction...

IsoAcoustics ISO-200Sub
(3)
IsoAcoustics ISO-200Sub

Tripod for Speakers / Sub-Woofer Fixed height of 125 mm, Decouples the loud-speaker signal from the ground, Dimensions (contact surface): 200 x 254 mm, Maximum load capacity: 34 kg, Price per piece

TritonAudio NeoLev
(1)
TritonAudio NeoLev

Suspension damper Mechanical decoupling for studio monitors, hi-fi speakers, turntables, CD / DVD / BluRay players, preamplifiers etc., Based on two repulsive neodymium magnets, Eliminates acoustic...

  • Type: Absorber
Auralex Acoustics MoPAD
(351)
Auralex Acoustics MoPAD

Acoustic Isolation Pads Solution for the decoupling of loudspeakers (up to 44 kg) from their supporting surface, Eliminate disturbing resonances, vibrations, Inclination: 0°, 4° & 8° possible,...

  • Type: Studio Monitor Decoupler
  • Dimensions: 300 x 100 mm
Auralex Acoustics ProPAD Monitor Isolators
(22)
Auralex Acoustics ProPAD Monitor Isolators

Foam Base Pads For decoupling monitor speakers, Increased resolution in mid-range frequencies, Improved definition of low frequencies, Reduces extraneous mechanical resonance, Anti-slip ISO-Plate...

  • Type: Studio Monitor Decoupler
  • Dimensions: 203 x 330 x 54 mm
IsoAcoustics ISO-130
(2)
IsoAcoustics ISO-130

Table stand for speakers / monitors 2 Units, Height adjustable: 80-203 mm, Adjustable inclination, Allows you to adjust the speakers for an optimal dispersion pattern in the direction of the...

$14.10 €12.56
Plus $33.69 shipping

The price in USD is a guideline price only!

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
(3)
Recently Viewed
Rode Wireless GO

Rode Wireless GO; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20 kHz...

Recently Viewed
Mooer GE 300

Multi-Effects Processor Integrated ToneCapture function with 4 modes (Amp / Stomp / Guitar / Cab) to capture the sound of your favourite gear, 108 High quality amp simulations, 43 IR (Impulse Response) speaker cab simulations, Support for additional Impulse...

(3)
Recently Viewed
TC Electronic Polytune 3 Noir

TC Electronic Polytune 3 Noir; Effects Pedal for Electric Guitar; compact polyphonic tuner/buffer, tuner in effectpedal size, Bonafide buffer circuitry preserves your tone through long cable runs and multiple effects, polyphonic tuning - tune all strings simultaneously, fast chromatic tuner...

Recently Viewed
Native Instruments Komplete Audio 6 MK2

6-Channel Audio Interface 24-Bit / 192 kHz, 2 Mic/Line/Instrument Combo Inputs: XLR/jack 6.3 mm, 2 Line inputs: 6.3 mm Jack, 4 Line outputs: 6.3 mm Jack DC-coupled, S/PDIF input coaxial, MIDI input and output, 2 Stereo headphone outputs: 6.3...

Recently Viewed
K&M 21427

K&M 21427, professional carrying case for 6 microphone stands, includes castors for easy and comfortable transport, case made of extremely durable 1680D nylon fabric, all seams hand-stitched in high quality, padded carrying handles and a durable zipper, castors included, dimensions:...

Recently Viewed
RCF Art 312 MK III

RCF Art 312 MK III - full range passive speaker, 12"/1", 300W, 90x70° 12" woofer and 1" driver with 1.5" Mylar diaphragm, 8ohm, 127dB max, Speaker Twist in/out, plastic housing, pole mount adapter, 4 x M10-Flying points and 3 handles,...

Recently Viewed
ADJ Contour

ADJ Contour; LED mirror ball effect; multi-colored beams crisscross back and forth at different speeds similar to a classic "fan style" effect; 36 lenses that project multi-colored beams of light from 27x 1.5W RGB LEDs; 15 built-in lightshows; controlled by...

(1)
Recently Viewed
Magma DJ Controller Case Prime 4

Magma DJ Controller Case Prime 4, flight case suitable for Denon Prime 4, Heavy duty construction of 9 mm vinyl laminated plywood, Solid aluminum profiles and spring loaded latches, Secure stacking due to stackable ball corners, Full padded interior keeps...

(2)
Recently Viewed
Jazzlab saXholder PRO

Saxophone holder For Baritone, Tenor, Alto, and Soprano saxophones, Transfers the weight evenly across both shoulders, No load on the cervical vertebrae, Can be adjusted quickly with one hand, Space-saving: Smaller than a sheet of paper when folded, Comfortable...

Recently Viewed
Lewitt LCT 040

Small Diaphragm Condenser Microphone Polar pattern: Cardioid, Max. SPL: 135 dB, Sensitivity: 18.8 mV / Pa, Dynamic range: 115 dB (A), Requires +48 V phantom power, Dimensions (Ø x L): 24 x 83 mm, Weight: 44.6 g

(2)
Recently Viewed
Harley Benton Custom Line Thunder 99

Guitar Power Amplifier in Pedal Format Compact power amp pedal for electric guitar, For direct connection to any preamp, pedal or effects unit, Power: 2 x 50W to 4 ohms, For 4 - 16 ohm speakers, Master volume controller,...

Recently Viewed
Fender CLSC SRS Mustang/Duo Case

Guitar Case Hardshell case for Fender Mustang/Duo Sonic models, Lining on the inside: Red plush, Vinyl wrapped steel core carry handle, Large storage compartment with lid, Steel draw latches, 1 Locking latch with key set, Internal dimensions: 100.33 cm...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.